US-XG-6POE
UniFi Switch 6 XG PoE is a fully managed Layer 3 switch with (4) 1/2.5/5/10 Gigabit 802.3bt (PoE++) RJ45 ports. The 802.3bz compliant ports extend Multi-Gigabit range over existing cabling. Each 10G PoE++ port provides up to 60W of PoE power, making the UniFi Switch 6 XG PoE ideal for use with UniFi BaseStation XG, UniFi UAP XG, and UniFi UAP SHD.
USW-Aggregation
Managed layer 2 aggregation switch sporting (8) 10G SFP+ ports for high capacity link aggregation. The UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design, it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability.
NSW-RPG071E-V12
The NETSTAR NSW-RPG071E-V12 Reverse Power over Ethernet Switch (Reverse PoE) is managed gigabit switch, which, facilitates power supply for installation in corridors, providing broadband network access for families and small to medium enterprises by using Cat-5 or Cat-6 cables routed in the building.
CRS317-1G-16S+RM
The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.
CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.
UC-CK
UniFi Controller, Cloud Key
Featuring Hybrid Cloud technology, the UniFi® Cloud Key securely runs a local instance of the UniFi Controller software and features cloud Single Sign-On for remote access.
USW-48-POE
The USW-48-PoE is a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports, and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-48-PoE features a 1.3" touch LCM to provide status.
CRS328-4C-20S-4S+RM
The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.
The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. A RJ45 console port is available for management and debugging, and a mode button can be customised to execute any RouterOS commands.
USW-Pro-48-POE
UniFi Switch Pro 48 PoE is a fully managed Layer 3 switch with (8) 802.3bt (PoE++) and (40) 802.3at (PoE+) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Switch Pro 48 PoE features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server.
NS-ER7-E1-V12
7 x 10/100 Base T Reverse PoE Ports ( RpoE)& 1 x 10/100 Base T Uplink Port & 12V DC Power Out for ONU
ES-24-250W
Advanced Switching Technology for the Masses
Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.
CRS354-48P-4S+2Q+RM
This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setups. We have included a mighty power supply that can provide 750 W of power – this switch can handle a lot.
The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.
USW-48
UniFi Switch 48 is a fully managed Layer 2 switch with (48) Gigabit Ethernet ports and (4) 1G SFP ports for fiber connectivity. The UniFi Switch 48 features a rich set of Layer 2 capabilities and fanless, silent cooling for use as an access layer switch. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.
NS-RP071P-OD
7 x 10/100 Base T Reverse PoE Ports (RpoE) 1 x 10/100 Base PoE Out Port(24V)(With Weather Proof Casing)
CRS354-48G-4S+2Q+RM
If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product we aim to set a new price-performance bar – get more features while spending way less! <
This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.
US-8-5
Expand and power your network with the UniFi® Switch 8, part of the Ubiquiti Networks® UniFi Enterprise System. The UniFi® Switch 8 is a compact, fully managed Gigabit switch, delivering robust performance and intelligent switching for enterprise networks.
The UniFi® Switch 8 features the flexibility of being powered by PoE or by the included AC/DC adapter. One PoE passthrough port provides up to 12W PoE output to power a UniFi access point or other PoE device. The US-8 offers (8) Gigabit Ethernet ports and supports up to 8 Gbps total, non-blocking line rate.
ES-48-Lite
Managed Gigabit Switches with SFP+
Non-Blocking Throughput Switching Performance
Gigabit Ethernet RJ45 Ports
SFP+/SFP Fiber Connectivity Option
USW-Pro-48
The UniFi Switch Pro 48 is a fully managed Layer 3 switch with (48) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.
The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.
US-XG-6POE
UniFi Switch 6 XG PoE is a fully managed Layer 3 switch with (4) 1/2.5/5/10 Gigabit 802.3bt (PoE++) RJ45 ports. The 802.3bz compliant ports extend Multi-Gigabit range over existing cabling. Each 10G PoE++ port provides up to 60W of PoE power, making the UniFi Switch 6 XG PoE ideal for use with UniFi BaseStation XG, UniFi UAP XG, and UniFi UAP SHD.
