Reverse PoE Switch With Fiber Uplink Port

NS-ER7-F1

7 x 10/100 Base T Reverse PoE Ports ( RpoE) & 1 x 10/100 Base FX Port , /13T for 1310nmTX-1550nmRX OR /15T for 1550nmTX-1310nmRX

DATASHEET

NETSTAR switch has intelligent Power management features solving a major problem of powering the device for Internet Service Provider. This switch can be powered using Remote Power from the customer using specially designed NETMODEM(PoE Injector) or any standard PoE Injector (24V DC, 0.75 AMP). This eliminates the needs of arranging power at building top (UPS does not require/ No need to pay more money to customer or society). This saves a lot of MONEY of ISPs and improves uninterrupted service to the customer.

Technical Specifications

Ethernet Connector 7 x RJ45 Connector(10/100Base-TX with Auto-MDIX)

& 1 x 100 Base FX Port

(13T for 1310nm-TX & 1550nm-RX OR

15T for 1550nm-TX & 1310nm-RX)

 Uplink 1 x 10/100 Base FE Fiber Port (Port 8)

 Downlink 7 x 10/100 Base T Reverse PoE Ports (Port 1 to Port 7)

(Data + Power IN)

Standards IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex

IEEE Std. 802.3u 100BASE-TX, 10/100Mbps, Half/Full Duplex

IEEE Std. 802.3x Flow control and Back-pressure.

IEEE Std. 802.3az Energy Efficient Ethernet

Protocols CSMA/CD

Transmission Method Store and Forward

MAC Address 1K MAC address

Packet Buffer Embedded 448K bits packet buffer

Maximum Forwarding Packet Length 1536 bytes

Filtering / Forwarding Rates 100Mbps Port – 148,800pps

10Mbps Port – 14,880pps

Network Cable 4-pair UTP/STP Cat 5 cable

LEDs

  Link/Activity per Ethernet port

Power: On/Off for Switch

Power: On/Off for PoE Injector

Power Over Ethernet Injector: Power Supply (IN) Power over Ethernet 24V @ 18W on Spare Pair (to supply power to the Netstar switch.

No. of Ethernet Ports that can

Power ON the Switch Anyone/All of the seven Downlink Ports

Power Over Ethernet Power over Ethernet Injector on Four Pair Cable

Ethernet Devices that can be powered Single

CAT-5 Cable Data Lines Pair 1: Pins 1/2 , Pair 2: Pins3/6

CAT-5 Cable Power Lines + VDC: Pins 4/5 , -VDC: Pins 7/8

Power consumption 2 Watt (Switch)

5 Watt (PoE Injector)

Operating Temperature 0° to 50°C

Storage environment 0° to 75°C

Operating Humidity 20% to 95% (non-condensing)

Dimension of Switch 158mm x 60mm x 50mm

Weight of Switch 171gm

Features

1) Reverse PoE Technology: 8 Port 10/100 Reverse PoE Switch which has latest generation of fast Ethernet Reverse PoE switching technology. It contains 7 x 10/100 Base-T Reverse PoE Ports (RPoE) , 1 x 10/100 Base Uplink FX Port –13T for 1310nm-TX & 1550nm-RX OR 15T for 1550nm-TX & 1310nmRX.

2) Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.

3) Supports Non-Blocking Wire Speed: The Switch forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.

4) Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3 Switches of NS-ER7-P1).

5) Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.

6) Surge Protection: We provide 2500V Surge protection on each port to protect against high voltage surge on data ports or uplink port.

7) Over Voltage Protection: Over Voltage Protection is provided on each Data Port to eliminate damage due to connection of Higher Voltage (Higher than 24V DC , upto 50V DC). By mistake if user connect more then 24V PoE Injector then Switch will goes on power off mode and will start working again once this high voltage source is removed.

8) Over Current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.

NS-ER7-F1

Write your review

Reverse PoE Switch With Fiber Uplink Port

NS-ER7-F1

7 x 10/100 Base T Reverse PoE Ports ( RpoE) & 1 x 10/100 Base FX Port , /13T for 1310nmTX-1550nmRX OR /15T for 1550nmTX-1310nmRX

DATASHEET

Write your review

16 other products in the same category

S1242GP

S1242GP

The S1242GP 24-Port Gigabit PoE Ethernet switch is an unmanaged PoE switch designed to meet SMB, hotel and SOHO network needs. It offers superior performance, simple installation. Its salient features are the latest Ethernet power supply capacity with integrated high power PoE ports. S1242GP provides 24 10/100/1000 Mbps PoE ports and 2 10/100/1000Mbps uplink SFP ports, with total 380W PoE output.

EdgeSwitch 12F

Brands: Ubiquiti

ES-12F

The EdgeSwitch ES-12F is a fully managed, high-performance Gigabit switch providing up to 12 fiber connectivity options for your growing networks.

DATA SHEET

CSS326-24G-2S+RM

Brands: Mikrotik

CSS326-24G-2S+RM

Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features.

It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.

DATA SHEET

CRS125-24G-1S-IN

Brands: Mikrotik

CRS125-24G-1S-IN

Cloud Router Switch 125-24G-1S-IN with Atheros AR9344 CPU, 128MB RAM, 24xGigabit LAN, 1xSFP, RouterOS L5, LCD panel, desktop case, PSU

DATA SHEET

UniFi Switch 24 PoE (250W)

Brands: Ubiquiti

US-24-250W

UniFi Switch, 24-Port, 250W

US-24-250W Managed PoE+ Gigabit Switches with SFP Build and expand your network with Ubiquiti Networks® UniFi® Switch, part of the UniFi line of products. The UniFi Switch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks.

DATA SHEET

CRS212-1G-10S-1S+IN

Brands: Mikrotik

CRS212-1G-10S-1S+IN

Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Special ears are provided for mounting the unit in rack.

DATA SHEET

UniFi Switch PRO 24 PoE Gen2

Brands: Ubiquiti

USW-Pro-24-POE

UniFi Switch Pro 24 PoE is a fully managed Layer 3 switch with (8) 802.3bt (PoE++) and (16) 802.3at (PoE+) Gigabit Ethernet ports. (2) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Switch Pro 24 PoE features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server.

DATA SHEET

UniFi Switch PRO 48 PoE Gen2

Brands: Ubiquiti

USW-Pro-48-POE

UniFi Switch Pro 48 PoE is a fully managed Layer 3 switch with (8) 802.3bt (PoE++) and (40) 802.3at (PoE+) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Switch Pro 48 PoE features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. 

DATA SHEET

UniFi Switch 48 PoE Gen2

Brands: Ubiquiti

USW-48-POE

The USW-48-PoE is a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports, and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-48-PoE features a 1.3" touch LCM to provide status.

DATA SHEET

CRS309-1G-8S+IN

Brands: Mikrotik

CRS309-1G-8S+IN

The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.

The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).

DATA SHEET

CRS354-48P-4S+2Q+RM

Brands: Mikrotik

CRS354-48P-4S+2Q+RM

This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setups. We have included a mighty power supply that can provide 750 W of power – this switch can handle a lot.

The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.

DATA SHEET

S1042GP

S1042GP

The S1042GP 4-port Gigabit PoE Ethernet switch is an unmanaged PoE switch designed to meet SMB, hotel and SOHO network needs. It offers superior performance, simple installation. Its salient features are the latest Ethernet power supply capacity with integrated high power PoE ports. S1042GP provides 4 10/100/1000Mbps PoE ports and 2 10/100/1000Mbps uplink ports.

EdgeSwitch PoE+ 48 (500W)

Brands: Ubiquiti

ES-48-500W

Advanced Switching Technology for the Masses

Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

DATA SHEET

EdgeSwitch PoE 16 (150W)

Brands: Ubiquiti

ES-16-150W

Managed PoE+ Gigabit Switches with SFP

Non-Blocking Throughput Switching Performance

Gigabit Ethernet RJ45 and SFP+/SFP Ports

Auto-Sensing IEEE 802.3af/at PoE

DATA SHEET