Reverse PoE Switch With 12 VDC Out For ONU

NS-ER7-E1-V12

7 x 10/100 Base T Reverse PoE Ports ( RpoE)& 1 x 10/100 Base T Uplink Port & 12V DC Power Out for ONU

DATASHEET

NETSTAR switch has intelligent Power management features solving a major problem of powering the device for Internet Service Provider. This switch can be powered using Remote Power from customer using specially designed NETMODEM (PoE Injector) or any standard PoE Injector (24V DC, 0.75 AMP). This eliminates the needs of arranging power at building top (UPS not require/ No need to pay more money to customer or society). This saves lot of MONEY of ISPs and improves uninterrupted service to the customer.

TECHNICAL SPECIFICATIONS

Ethernet Connector RJ45 Jacks (8 Ports) 10/100Base-TX with Auto-MDIX

 Uplink 1 x 10/100 Base T Data Uplink Port (Port 8)

 Downlink 7 x 10/100 Base T Reverse PoE Ports (Port 1 to Port 7)

(Data + Power IN)

Standards IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex

IEEE Std. 802.3u 100BASE-TX, 10/100Mbps, Half/Full Duplex

IEEE Std. 802.3x Flow control and Back-pressure.

IEEE Std. 802.3az Energy Efficient Ethernet

Protocols CSMA/CD

Transmission Method Store and Forward

MAC Address 1K MAC address

Packet Buffer Embedded 448K bits packet buffer

Maximum Forwarding Packet Length 1536 bytes

Filtering / Forwarding Rates 100Mbps Port – 148,800pps

10Mbps Port – 14,880pps

Network Cable 4-pair UTP/STP Cat 5 cable

LEDs Link/Activity per Ethernet port

Power: On/Off for Switch

Power: On/Off for PoE Injector

Power Over Ethernet Injector: Power Supply (IN) Power over Ethernet 24V @ 18W on Spare Pair (to supply power to the Netstar  switch as well as a compatible PoE device (e.g. CPE))

No. of Ethernet Ports that can

Power ON the Switch & ONU Anyone/All of the seven Downlink Ports

Power Over Ethernet Power over Ethernet Injector on Four Pair Cable

DC Out 12V DC Out through DC Jack for powering other Device like ONU

Ethernet Devices that can be powered Single

CAT-5 Cable Data Lines Pair 1: Pins 1/2 , Pair 2: Pins3/6

CAT-5 Cable Power Lines + VDC: Pins 4/5 , -VDC: Pins 7/8

Power consumption 2 Watt (Switch)

5 Watt (PoE Injector)

Operating Temperature 0° to 50°C

Storage environment 0° to 75°C

Operating Humidity 20% to 95% (non-condensing)

Dimension of Switch 158mm x 60mm x 50mm

Weight of Switch 178gm

Features

1) Reverse PoE Technology: 8 Port 10/100 Reverse PoE Switch which has latest generation of fast Ethernet Reverse PoE switching technology. It contains 7 x 10/100 Base T Reverse PoE Ports (RPoE), 1 x 10/100 Base Data Uplink Port & 12V DC Out for Powering ONU.

2) Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.

3) Supports Non-Blocking Wire Speed: The Switch forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.

4) Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3 Switches of NS-ER7-P1).

5) Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.

6) Surge Protection: We provide 2500V Surge protection on each port to protect against high voltage surge on data ports or uplink port.

7) Over Voltage Protection: Over Voltage Protection is provided on each Data Port to eliminate damage due to connection of Higher Voltage (Higher than 24V DC , upto 50V DC). By mistake if user connect more then 24V PoE Injector then Switch will goes on power off mode and will start working again once this high voltage source is removed.

8) Over Current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance andvoiding frequent change of blown fuse.

NS-ER7-E1-V12

Write your review

Reverse PoE Switch With 12 VDC Out For ONU

NS-ER7-E1-V12

7 x 10/100 Base T Reverse PoE Ports ( RpoE)& 1 x 10/100 Base T Uplink Port & 12V DC Power Out for ONU

DATASHEET

Write your review

16 other products in the same category

EdgeSwitch PoE+ 24 (500W)

Brands: Ubiquiti

ES-24-500W

Advanced Switching Technology for the Masses

Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

DATA SHEET

UniFi Switch Enterprise 24 PoE

Brands: Ubiquiti

USW-Enterprise-24-PoE

Managed Layer 3 switch with (12) 2.5G RJ45 ports with PoE+ for WiFi 6 APs, (12) Gigabit RJ45 ports with PoE+, and (2) 10G SFP+ ports for fiber uplinks. It offers (12) 2.5G RJ45 Ethernet ports, (12) 1G RJ45 Ethernet ports, and (2) 10G SFP+ ports, providing 2.5G PoE links to your WiFi 6 APs and 10G fiber uplinks to your network. Features include a 1.3" touchscreen, single-row RJ45 port layout for easy patch panel cable management, and UniFi SmartPower Redundant Power System* (USP-RPS) support for intelligent protection from internal PSU interruption or failure.

DATA SHEET

UniFi Switch Pro 48 Gen2

Brands: Ubiquiti

USW-Pro-48

The UniFi Switch Pro 48 is a fully managed Layer 3 switch with (48) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.

The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere. 

DATA SHEET

EdgeSwitch 5XP, 5 Port

Brands: Ubiquiti

ES-5XP

EdgeSwitch 5XP, 5-Port, PoE

Advanced Power over Ethernet Switches

The EdgeSwitch XP delivers reliable passive PoE and Gigabit connectivity to attached Ubiquiti devices and other devices that support passive PoE.

DATA SHEET

RB260GSP

Brands: Mikrotik

CSS106-1G-4P-1S

The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip.

The device is running an operating system designed specifically for MikroTik Switch products - SwOS.

DATA SHEET

UniFi Switch Flex

Brands: Ubiquiti

USW-Flex

Build and expand your network with the UniFi® Switch, part of the UniFi Enterprise System. The UniFi Switch, model USW-Flex, is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports, providing 1 PoE input and 4 PoE output links to your devices.

The UniFi Switch Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE, USW-Pro-24-PoE, US-XG-6POE, and USW-Industrial switches, sold separately) as power source, USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options.

DATA SHEET

8 Port 10/100/1000M Web Managed Ethernet Reverse PoE Switch

Brands: Netstar

NSW-RPG071E-V12

The NETSTAR NSW-RPG071E-V12 Reverse Power over Ethernet Switch (Reverse PoE) is managed gigabit switch, which, facilitates power supply for installation in corridors, providing broadband network access for families and small to medium enterprises by using Cat-5 or Cat-6 cables routed in the building.

DATASHEET

UniFi Switch 48 PoE (500W)

Brands: Ubiquiti

US-48-500W

UniFi Switch, 48-Port, 500W

Managed PoE+ Gigabit Switches with SFP

Build and expand your network with Ubiquiti Networks® UniFi® Switch, part of the UniFi line of products. The UniFi Switch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks

DATA SHEET

CRS328-4C-20S-4S+RM

Brands: Mikrotik

CRS328-4C-20S-4S+RM

The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.

The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. A RJ45 console port is available for management and debugging, and a mode button can be customised to execute any RouterOS commands.

DATA SHEET

S1242GP

S1242GP

The S1242GP 24-Port Gigabit PoE Ethernet switch is an unmanaged PoE switch designed to meet SMB, hotel and SOHO network needs. It offers superior performance, simple installation. Its salient features are the latest Ethernet power supply capacity with integrated high power PoE ports. S1242GP provides 24 10/100/1000 Mbps PoE ports and 2 10/100/1000Mbps uplink SFP ports, with total 380W PoE output.

CRS106-1C-5S

Brands: Mikrotik

CRS106-1C-5S

Cloud Router Switch 106-1C-5S with QCA8511 400MHz CPU, 128MB RAM, 1x Combo port (Gigabit Ethernet or SFP), 5 x SFP cages, RouterOS L5, desktop case, PSU

DATA SHEET

UniFi Switch Aggregation

Brands: Ubiquiti

USW-Aggregation

Managed layer 2 aggregation switch sporting (8) 10G SFP+ ports for high capacity link aggregation. The UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design, it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability.

DATA SHEET

UniFi Switch 16 PoE Gen2

Brands: Ubiquiti

USW-16-POE

The USW-16-POE is a configurable Gigabit Layer 2 switch with sixteen Gigabit Ethernet ports including eight auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-16-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet.

DATA SHEET

CRS354-48G-4S+2Q+RM

Brands: Mikrotik

CRS354-48G-4S+2Q+RM

If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product we aim to set a new price-performance bar – get more features while spending way less! <

This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.

DATA SHEET