NS-ER7-E1-V12 - Reverse PoE Switch With 12 VDC Out For ONU

NS-ER7-E1-V12

7 x 10/100 Base T Reverse PoE Ports ( RpoE)& 1 x 10/100 Base T Uplink Port & 12V DC Power Out for ONU

DATASHEET

NETSTAR switch has intelligent Power management features solving a major problem of powering the device for Internet Service Provider. This switch can be powered using Remote Power from customer using specially designed NETMODEM (PoE Injector) or any standard PoE Injector (24V DC, 0.75 AMP). This eliminates the needs of arranging power at building top (UPS not require/ No need to pay more money to customer or society). This saves lot of MONEY of ISPs and improves uninterrupted service to the customer.

TECHNICAL SPECIFICATIONS

Ethernet Connector RJ45 Jacks (8 Ports) 10/100Base-TX with Auto-MDIX

 Uplink 1 x 10/100 Base T Data Uplink Port (Port 8)

 Downlink 7 x 10/100 Base T Reverse PoE Ports (Port 1 to Port 7)

(Data + Power IN)

Standards IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex

IEEE Std. 802.3u 100BASE-TX, 10/100Mbps, Half/Full Duplex

IEEE Std. 802.3x Flow control and Back-pressure.

IEEE Std. 802.3az Energy Efficient Ethernet

Protocols CSMA/CD

Transmission Method Store and Forward

MAC Address 1K MAC address

Packet Buffer Embedded 448K bits packet buffer

Maximum Forwarding Packet Length 1536 bytes

Filtering / Forwarding Rates 100Mbps Port – 148,800pps

10Mbps Port – 14,880pps

Network Cable 4-pair UTP/STP Cat 5 cable

LEDs Link/Activity per Ethernet port

Power: On/Off for Switch

Power: On/Off for PoE Injector

Power Over Ethernet Injector: Power Supply (IN) Power over Ethernet 24V @ 18W on Spare Pair (to supply power to the Netstar  switch as well as a compatible PoE device (e.g. CPE))

No. of Ethernet Ports that can

Power ON the Switch & ONU Anyone/All of the seven Downlink Ports

Power Over Ethernet Power over Ethernet Injector on Four Pair Cable

DC Out 12V DC Out through DC Jack for powering other Device like ONU

Ethernet Devices that can be powered Single

CAT-5 Cable Data Lines Pair 1: Pins 1/2 , Pair 2: Pins3/6

CAT-5 Cable Power Lines + VDC: Pins 4/5 , -VDC: Pins 7/8

Power consumption 2 Watt (Switch)

5 Watt (PoE Injector)

Operating Temperature 0° to 50°C

Storage environment 0° to 75°C

Operating Humidity 20% to 95% (non-condensing)

Dimension of Switch 158mm x 60mm x 50mm

Weight of Switch 178gm

Features

1) Reverse PoE Technology: 8 Port 10/100 Reverse PoE Switch which has latest generation of fast Ethernet Reverse PoE switching technology. It contains 7 x 10/100 Base T Reverse PoE Ports (RPoE), 1 x 10/100 Base Data Uplink Port & 12V DC Out for Powering ONU.

2) Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.

3) Supports Non-Blocking Wire Speed: The Switch forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.

4) Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3 Switches of NS-ER7-P1).

5) Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.

6) Surge Protection: We provide 2500V Surge protection on each port to protect against high voltage surge on data ports or uplink port.

7) Over Voltage Protection: Over Voltage Protection is provided on each Data Port to eliminate damage due to connection of Higher Voltage (Higher than 24V DC , upto 50V DC). By mistake if user connect more then 24V PoE Injector then Switch will goes on power off mode and will start working again once this high voltage source is removed.

8) Over Current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance andvoiding frequent change of blown fuse.

NS-ER7-E1-V12

Write your review

NS-ER7-E1-V12 - Reverse PoE Switch With 12 VDC Out For ONU

NS-ER7-E1-V12

7 x 10/100 Base T Reverse PoE Ports ( RpoE)& 1 x 10/100 Base T Uplink Port & 12V DC Power Out for ONU

DATASHEET

Write your review

16 other products in the same category

Brands: Mikrotik

CRS305-1G-4S+IN

The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy.

The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with a disruptive price, providing the best price/performance on the market.

DATA SHEET

Brands: Ubiquiti

USW-24-POE

The USW-24-POE is a configurable Gigabit Layer 2 switch with twenty-four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-24-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet.

DATA SHEET

Brands: Mikrotik

CRS112-8G-4S-IN

Cloud Router Switch 112-8G-4S-IN is a “small size low cost” member of our CRS series. It comes with eight Gigabit Ethernet ports and four SFP cages.

Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS.

All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

DATA SHEET

Brands: Ubiquiti

USW-Pro-48

The UniFi Switch Pro 48 is a fully managed Layer 3 switch with (48) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.

The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere. 

DATA SHEET

Brands: Ubiquiti

ES-48-Lite

Managed Gigabit Switches with SFP+

Non-Blocking Throughput Switching Performance

Gigabit Ethernet RJ45 Ports

SFP+/SFP Fiber Connectivity Option

DATA SHEET

Brands: Ubiquiti

USW-16-POE

The USW-16-POE is a configurable Gigabit Layer 2 switch with sixteen Gigabit Ethernet ports including eight auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-16-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet.

DATA SHEET

S1242GP

The S1242GP 24-Port Gigabit PoE Ethernet switch is an unmanaged PoE switch designed to meet SMB, hotel and SOHO network needs. It offers superior performance, simple installation. Its salient features are the latest Ethernet power supply capacity with integrated high power PoE ports. S1242GP provides 24 10/100/1000 Mbps PoE ports and 2 10/100/1000Mbps uplink SFP ports, with total 380W PoE output.

Brands: Mikrotik

CRS326-24G-2S+IN

This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages, 512 MB of RAM, 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall, NAT and even some VPN.

CRS326-24G-2S+IN provides all the basic functionality for a managed switch, and even more: port-to- port forwarding, MAC filtering, VLAN configuration, traffic mirroring, bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cage supports both 1.25G SFP and 10G SFP+ modules.

DATA SHEET

Brands: Ubiquiti

US-16-150W

UniFi Switch, 16-Port, 150W

The UniFi® Switch delivers robust performance over its 18 independent switching ports. Two SFP ports offer optical connectivity, and 16 Gigabit Ethernet ports offer 802.3af/at PoE+ or 24V passive PoE sharing a total of 150W PoE.

DATA SHEET

Brands: Ubiquiti

USW-Flex-Mini

5-Port managed Gigabit Ethernet switch powered by 802.3af/at PoE or 5V, 1A USB-C power adapter.

Build and expand your network with the UniFi® Switch, part of the Ubiquiti Networks® UniFi Enterprise System. The UniFi Switch, model USW-Flex-Mini, is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports, providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the included USB Type-C power adapter or with 802.3af PoE Ethernet in port 1.

DATA SHEET

Brands: Ubiquiti

USW-Pro-24

UniFi Switch Pro 24 is a fully managed Layer 3 switch with (24) Gigabit Ethernet ports. (2) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Switch Pro 24 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.

DATA SHEET

Brands: Mikrotik

CRS354-48G-4S+2Q+RM

If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product we aim to set a new price-performance bar – get more features while spending way less! <

This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.

DATA SHEET

Brands: Ubiquiti

US-24-250W

UniFi Switch, 24-Port, 250W

US-24-250W Managed PoE+ Gigabit Switches with SFP Build and expand your network with Ubiquiti Networks® UniFi® Switch, part of the UniFi line of products. The UniFi Switch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks.

DATA SHEET

Brands: Ubiquiti

US-16-XG

UniFi Switch, 16-Port, 10 Gigabit

The US‑16‑XG is a fully managed, 16‑port, 10G fiber switch that enhances network capacity by providing high‑bandwidth aggregation connectivity to multiple switches in your network.

DATA SHEET

S1042GP

The S1042GP 4-port Gigabit PoE Ethernet switch is an unmanaged PoE switch designed to meet SMB, hotel and SOHO network needs. It offers superior performance, simple installation. Its salient features are the latest Ethernet power supply capacity with integrated high power PoE ports. S1042GP provides 4 10/100/1000Mbps PoE ports and 2 10/100/1000Mbps uplink ports.