NSW-RPG071E-V12 - 8 Port Web Managed Ethernet Reverse PoE Switch

NSW-RPG071E-V12 - 8 Port Web Managed Ethernet Reverse PoE Switch

NSW-RPG071E-V12

The NETSTAR NSW-RPG071E-V12 Reverse Power over Ethernet Switch (Reverse PoE) is managed gigabit switch, which, facilitates power supply for installation in corridors, providing broadband network access for families and small to medium enterprises by using Cat-5 or Cat-6 cables routed in the building.

DATASHEET

The NSW-RPG071EV12 Reverse PoE is a box-type device, providing 1 uplink ports and 8 LAN user ports, and is powered by the power sourcing equipment (PoE) deployed in users’ residences. The NSW-RPG071EV12 Reverse PoE is applied in scenarios where there is no alternating current (AC) power supply in corridors, featuring easy installation and maintenance, broad temperature range, low power consumption, mute design, high stability, environment-friendly, and energy conservation.

Pd  port 1-7 port

POE pin 45+,78-

PoE voltage 24-48VDC

Interface 8 10/100/1000Mbps RJ45 Ports

distance 100 meters

Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,

IEEE 802.3x, IEEE  802.1q, IEEE 802.1p

Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

EIA/TIA-568 100Ω STP (maximum 100m)

100BASE-TX: UTP category 5, 5e cable (maximum 100m)

EIA/TIA-568 100Ω STP (maximum 100m)

1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum

100m)EIA/TIA-568 100Ω STP (maximum 100m)

Dimensions ( W x D x H ) 160*95*28 mm

Features

1. With 7 reverse incoming PoE Ports and 1 Uplink Port 2. Working with 24-48vdc reverse poe compliant PoE, expands LAN network 3. Output 12vdc power supply via dc jack, which can be supplied to ONU/ONT 4. Support L2 web management, QOS,VLAN, link aggregation 5. Plug and play

NSW-RPG071E-V12

Data sheet

PoE
24V/48V Passive PoE

Write your review

NSW-RPG071E-V12 - 8 Port Web Managed Ethernet Reverse PoE Switch

NSW-RPG071E-V12

The NETSTAR NSW-RPG071E-V12 Reverse Power over Ethernet Switch (Reverse PoE) is managed gigabit switch, which, facilitates power supply for installation in corridors, providing broadband network access for families and small to medium enterprises by using Cat-5 or Cat-6 cables routed in the building.

DATASHEET

Write your review

16 other products in the same category

Brands: Ubiquiti

USW-24-POE

The USW-24-POE is a configurable Gigabit Layer 2 switch with twenty-four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-24-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet.

DATA SHEET

S1242GP

The S1242GP 24-Port Gigabit PoE Ethernet switch is an unmanaged PoE switch designed to meet SMB, hotel and SOHO network needs. It offers superior performance, simple installation. Its salient features are the latest Ethernet power supply capacity with integrated high power PoE ports. S1242GP provides 24 10/100/1000 Mbps PoE ports and 2 10/100/1000Mbps uplink SFP ports, with total 380W PoE output.

Brands: Mikrotik

CRS112-8G-4S-IN

Cloud Router Switch 112-8G-4S-IN is a “small size low cost” member of our CRS series. It comes with eight Gigabit Ethernet ports and four SFP cages.

Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS.

All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

DATA SHEET

Brands: Mikrotik

CRS318-16P-2S+OUT

Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks.

Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers, masts and poles with hose clamps.

netPower 16P has a non-blocking throughput of 36 Gbps, switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps.

If you need more power, the MTP250-53V47-OD can output 53V 250W, while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure just like the netPower 16P, with extra protection from dust and moisture.

DATA SHEET

Brands: Mikrotik

CRS109-8G-1S-2HnD-IN

Cloud Router Switch 109-8G-1S-2HnD-IN with Atheros AR9344 CPU, 128MB RAM, 8xGigabit LAN, 1xSFP, 2.4Ghz 802.11b/g/n wireless, RouterOS L5, LCD panel, desktop case, PSU

DATA SHEET

Brands: Mikrotik

CRS326-24G-2S+IN

This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages, 512 MB of RAM, 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall, NAT and even some VPN.

CRS326-24G-2S+IN provides all the basic functionality for a managed switch, and even more: port-to- port forwarding, MAC filtering, VLAN configuration, traffic mirroring, bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cage supports both 1.25G SFP and 10G SFP+ modules.

DATA SHEET

Brands: Mikrotik

CRS354-48G-4S+2Q+RM

If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product we aim to set a new price-performance bar – get more features while spending way less! <

This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.

DATA SHEET

Brands: Ubiquiti

ES-12F

The EdgeSwitch ES-12F is a fully managed, high-performance Gigabit switch providing up to 12 fiber connectivity options for your growing networks.

DATA SHEET

Brands: Ubiquiti

ES-48-Lite

Managed Gigabit Switches with SFP+

Non-Blocking Throughput Switching Performance

Gigabit Ethernet RJ45 Ports

SFP+/SFP Fiber Connectivity Option

DATA SHEET

Brands: Ubiquiti

N-SW

The NanoSwitch is an outdoor, 4-port Gigabit switch with PoE pass-through. It is powered by 24V Passive PoE and provides up to 24W of power on three PoE out ports. The NanoSwitch is designed for outdoor deployment and supports up to 4 Gbps total, non-blocking line rate. 

*PoE Injector Not Included

DATA SHEET

Brands: Ubiquiti

USW-Pro-48

The UniFi Switch Pro 48 is a fully managed Layer 3 switch with (48) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.

The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere. 

DATA SHEET

Brands: Ubiquiti

ES-24-Lite

Managed Gigabit Switch with SFP

Non-Blocking Throughput Switching Performance

Gigabit Ethernet RJ45 Ports

SFP+/SFP Fiber Connectivity Options

DATA SHEET

Brands: Ubiquiti

USW-Aggregation

Managed layer 2 aggregation switch sporting (8) 10G SFP+ ports for high capacity link aggregation. The UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design, it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability.

DATA SHEET

Brands: Ubiquiti

USW-Lite-16-PoE

The UniFi Switch Lite 16 PoE is a fully managed Layer 2 switch with sixteen Gigabit Ethernet ports for your RJ45 Ethernet devices. Eight ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 45W for UniFi Access Points or other PoE devices.

Managed and configured by the UniFi Network application with UniFi mobile app support, the UniFi Switch Lite 16 PoE offers Layer 2 switching protocols and features. The UniFi Network application and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.

DATA SHEET