8 Port 10/100/1000M Web Managed Ethernet Reverse PoE Switch

NSW-RPG071E-V12

The NETSTAR NSW-RPG071E-V12 Reverse Power over Ethernet Switch (Reverse PoE) is managed gigabit switch, which, facilitates power supply for installation in corridors, providing broadband network access for families and small to medium enterprises by using Cat-5 or Cat-6 cables routed in the building.

DATASHEET

The NSW-RPG071EV12 Reverse PoE is a box-type device, providing 1 uplink ports and 8 LAN user ports, and is powered by the power sourcing equipment (PoE) deployed in users’ residences. The NSW-RPG071EV12 Reverse PoE is applied in scenarios where there is no alternating current (AC) power supply in corridors, featuring easy installation and maintenance, broad temperature range, low power consumption, mute design, high stability, environment-friendly, and energy conservation.

Pd  port 1-7 port

POE pin 45+,78-

PoE voltage 24-48VDC

Interface 8 10/100/1000Mbps RJ45 Ports

distance 100 meters

Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,

IEEE 802.3x, IEEE  802.1q, IEEE 802.1p

Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

EIA/TIA-568 100Ω STP (maximum 100m)

100BASE-TX: UTP category 5, 5e cable (maximum 100m)

EIA/TIA-568 100Ω STP (maximum 100m)

1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum

100m)EIA/TIA-568 100Ω STP (maximum 100m)

Dimensions ( W x D x H ) 160*95*28 mm

Features

1. With 7 reverse incoming PoE Ports and 1 Uplink Port 2. Working with 24-48vdc reverse poe compliant PoE, expands LAN network 3. Output 12vdc power supply via dc jack, which can be supplied to ONU/ONT 4. Support L2 web management, QOS,VLAN, link aggregation 5. Plug and play

NSW-RPG071E-V12

Data sheet

PoE
24V/48V Passive PoE

Write your review

8 Port 10/100/1000M Web Managed Ethernet Reverse PoE Switch

NSW-RPG071E-V12

The NETSTAR NSW-RPG071E-V12 Reverse Power over Ethernet Switch (Reverse PoE) is managed gigabit switch, which, facilitates power supply for installation in corridors, providing broadband network access for families and small to medium enterprises by using Cat-5 or Cat-6 cables routed in the building.

DATASHEET

Write your review

16 other products in the same category

CRS109-8G-1S-2HnD-IN

Brands: Mikrotik

CRS109-8G-1S-2HnD-IN

Cloud Router Switch 109-8G-1S-2HnD-IN with Atheros AR9344 CPU, 128MB RAM, 8xGigabit LAN, 1xSFP, 2.4Ghz 802.11b/g/n wireless, RouterOS L5, LCD panel, desktop case, PSU

DATA SHEET

CRS326-24S+2Q+RM

Brands: Mikrotik

CRS326-24S+2Q+RM

If you are working with substantial amount of data – like providing Internet access or maintaining a huge data center – this is the perfect upgrade for your setup. CRS326-24S+2Q+RM is our first product with 40 Gbps QSFP+ ports for remarkably fast and stable fiber connection.

Overall it has two 40 Gbps QSFP+ ports and twenty four 10 Gbps SFP+ ports, which provides total nonblocking throughput of 320 Gbps and switching capacity of 640 Gbps with forwarding rate of 252 Mpps with most common packets.

DATA SHEET

UniFi Switch Flex Utility

Brands: Ubiquiti

USW-Flex-Utility

The Switch Flex Utility is an outdoor weatherproof enclosure designed for use with the Switch Flex.

It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security.

Note: UniFi Switch Flex, USW-Flex, sold separately

DATA SHEET

UniFi Switch Aggregation

Brands: Ubiquiti

USW-Aggregation

Managed layer 2 aggregation switch sporting (8) 10G SFP+ ports for high capacity link aggregation. The UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design, it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability.

DATA SHEET

UniFi Switch 48 Gen2

Brands: Ubiquiti

USW-48

UniFi Switch 48 is a fully managed Layer 2 switch with (48) Gigabit Ethernet ports and (4) 1G SFP ports for fiber connectivity. The UniFi Switch 48 features a rich set of Layer 2 capabilities and fanless, silent cooling for use as an access layer switch. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.

DATA SHEET

UniFi Switch Enterprise 24 PoE

Brands: Ubiquiti

USW-Enterprise-24-PoE

Managed Layer 3 switch with (12) 2.5G RJ45 ports with PoE+ for WiFi 6 APs, (12) Gigabit RJ45 ports with PoE+, and (2) 10G SFP+ ports for fiber uplinks. It offers (12) 2.5G RJ45 Ethernet ports, (12) 1G RJ45 Ethernet ports, and (2) 10G SFP+ ports, providing 2.5G PoE links to your WiFi 6 APs and 10G fiber uplinks to your network. Features include a 1.3" touchscreen, single-row RJ45 port layout for easy patch panel cable management, and UniFi SmartPower Redundant Power System* (USP-RPS) support for intelligent protection from internal PSU interruption or failure.

DATA SHEET

UniFi Switch Pro 24 Gen2

Brands: Ubiquiti

USW-Pro-24

UniFi Switch Pro 24 is a fully managed Layer 3 switch with (24) Gigabit Ethernet ports. (2) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Switch Pro 24 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.

DATA SHEET

UniFi Switch 24 PoE Gen2

Brands: Ubiquiti

USW-24-POE

The USW-24-POE is a configurable Gigabit Layer 2 switch with twenty-four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-24-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet.

DATA SHEET

UniFi Switch Pro 48 Gen2

Brands: Ubiquiti

USW-Pro-48

The UniFi Switch Pro 48 is a fully managed Layer 3 switch with (48) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.

The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere. 

DATA SHEET

CRS212-1G-10S-1S+IN

Brands: Mikrotik

CRS212-1G-10S-1S+IN

Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Special ears are provided for mounting the unit in rack.

DATA SHEET

UniFi Switch Flex

Brands: Ubiquiti

USW-Flex

Build and expand your network with the UniFi® Switch, part of the UniFi Enterprise System. The UniFi Switch, model USW-Flex, is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports, providing 1 PoE input and 4 PoE output links to your devices.

The UniFi Switch Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE, USW-Pro-24-PoE, US-XG-6POE, and USW-Industrial switches, sold separately) as power source, USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options.

DATA SHEET

FiberBox

Brands: Mikrotik

CRS105-5S-FB

The Fiberbox is an outdoor switch with five SFP ports, ideal for locations where distance is restricting the use of regular ethernet cables. The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers.

The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box. If not needed, remove it to have access to all five SFP ports for using with 1.25 Gbit fiber modules.

DATA SHEET

RB260GSP

Brands: Mikrotik

CSS106-1G-4P-1S

The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip.

The device is running an operating system designed specifically for MikroTik Switch products - SwOS.

DATA SHEET

CRS112-8P-4S-IN

Brands: Mikrotik

CRS112-8P-4S-IN

Cloud Router Switch 112-8P-4S-IN with QCA8511 400Mhz CPU, 128MB RAM, 8xGigabit LAN with PoE-out, 4xSFP, RouterOS L5, desktop case, PSU

DATA SHEET

EdgeSwitch PoE 16 (150W)

Brands: Ubiquiti

ES-16-150W

Managed PoE+ Gigabit Switches with SFP

Non-Blocking Throughput Switching Performance

Gigabit Ethernet RJ45 and SFP+/SFP Ports

Auto-Sensing IEEE 802.3af/at PoE

DATA SHEET