ES-48-Lite
Managed Gigabit Switches with SFP+
Non-Blocking Throughput Switching Performance
Gigabit Ethernet RJ45 Ports
SFP+/SFP Fiber Connectivity Option
Data sheet
RG-ES108GD
8-port 10/100/1000Mbps Unmanaged Non-PoE Switch
Highlight Features
CSS106-1G-4P-1S
The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip.
The device is running an operating system designed specifically for MikroTik Switch products - SwOS.
RG-NBS5100-48GT4SFP
52-Port Gigabit Layer 2+ Non-PoE Switch
Highlight Features
NS-ER7-E1-V12
7 x 10/100 Base T Reverse PoE Ports ( RpoE)& 1 x 10/100 Base T Uplink Port & 12V DC Power Out for ONU
ES-16-150W
Managed PoE+ Gigabit Switches with SFP
Non-Blocking Throughput Switching Performance
Gigabit Ethernet RJ45 and SFP+/SFP Ports
Auto-Sensing IEEE 802.3af/at PoE
CRS305-1G-4S+IN
The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy.
The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with a disruptive price, providing the best price/performance on the market.
S1042GP
The S1042GP 4-port Gigabit PoE Ethernet switch is an unmanaged PoE switch designed to meet SMB, hotel and SOHO network needs. It offers superior performance, simple installation. Its salient features are the latest Ethernet power supply capacity with integrated high power PoE ports. S1042GP provides 4 10/100/1000Mbps PoE ports and 2 10/100/1000Mbps uplink ports.
RG-NBS3200-24GT4XS
24-port Gigabit Layer 2 Managed Switch, 4 * 10G Uplinks
Highlight Features
RG-NBS5100-24GT4SFP
28-Port Gigabit Layer 2+ Non-PoE Switch
Highlight Features
ONV-POE33010PFM
L2+ managed PoE fiber switch with 8* 10/100/1000M RJ45 ports and 2*100/1000M SFP fiber slot ports, Port 1-8 can support IEEE 802.3af/at PoE standard, Built-in 130W power supply.
CRS326-24G-2S+RM
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features.
It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
CRS318-1Fi-15Fr-2S-OUT
This switch brings the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.
You don’t have to worry about power options in the attic or the utility room – netPower 15FR has 15 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Ethernet port 15 can power other PoE capable devices with the same voltage as applied to the unit.
There are two SFP ports for fiber connectivity. netPower 15FR has a non-blocking throughput of 3.6 Gbps, switching capacity of 7.2 Gbps and forwarding rate of 5.4 Mpps.
CRS318-16P-2S+OUT
Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks.
Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers, masts and poles with hose clamps.
netPower 16P has a non-blocking throughput of 36 Gbps, switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps.
If you need more power, the MTP250-53V47-OD can output 53V 250W, while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure just like the netPower 16P, with extra protection from dust and moisture.
RG-ES126S-LP V2
24-Port 10/100 Mbps with 2-Port Gigabit Rackmount PoE Switch
Highlight Features
UC-CK
UniFi Controller, Cloud Key
Featuring Hybrid Cloud technology, the UniFi® Cloud Key securely runs a local instance of the UniFi Controller software and features cloud Single Sign-On for remote access.
ES-48-Lite
Managed Gigabit Switches with SFP+
Non-Blocking Throughput Switching Performance
Gigabit Ethernet RJ45 Ports
SFP+/SFP Fiber Connectivity Option
