
10/100 24-Volt passive POE Injector
POE-24-0.5A-10/100
10/100 24-Volt passive POE Injector
Type G 3-Pin power supply
TP-SW8G-2SFP
The TP-SW8G-2SFP Power over Ethernet (PoE) 10 port Gigabit switch offered by Tycon® is a fully automatic high speed Layer 2+ Ethernet manageable switches. The 10 port model has 8 PoE + 2 SFP ports. The PoE ports are Mode A (pins 1,2,3,6) type and are manageable via the user interface. They can be set to PoE, PoE+ or OFF. Default is PoE+.
The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
POE-24-0.5A-10/100
10/100 24-Volt passive POE Injector
Type G 3-Pin power supply
TPDIN-MONITOR-WEB2
The TPDIN® Based Remote Monitor and Control System is a versatile tool which enables the equipment designer and installer to remotely monitor their equipment and site. The unit can be accessed via the network (web and SNMP) to remotely monitor up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using 4 on-board relays. The system has built-in surge protection to prevent damage from electrical surges.
TP-POE-1824
48V 802.3af/at input, Switch Selectable 18V or 24V 12W passive PoE output. 10/100Mb. Converts 802.3af PoE to passive PoE.
802.3af/at Converter - Converts 48V 802.3af/at PoE to 18/24VDC (switchable) Passive PoE
The TP-POE-1824 Power Over Ethernet 802.3af/at converter is a unique product allowing a customer to run a Passive PoE device from a standard 802.3af or at PoE switch. They accept 802.3af/at PoE in and provide a switch selectable 12W PoE output of 18VDC or 24VDC.
TP-VRHP-2424
Voltage Converter 18-36VDC Input, 24VDC @ 2.9A 70W Regulated output.
he TP-VRHP-2424 is a 70W voltage converter/regulator which accepts an input of plus or minus 18VDC to 36VDC and provides a regulated output of 24VDC @ 2.9A 70W. These units are perfect for providing stable regulated 24VDC voltage from 24VDC battery banks. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C.
POE-24-24W
PoE Injector, 24VDC, 24W
PoE Adapters power Ubiquiti products that support passive PoE.
TP-DCDC-2USB-48
USB Powered 48V Passive PoE inserter. 48VDC 12W Passive PoE output with 2 USB power inputs. 10/100Mb
The TP-DCDC-2USB-48 Passive Power Over Ethernet Power Source offered by Tycon Power Systems is a unique 48VDC Passive PoE injector powered by two USB ports. They work by supplying power to the remote device on the 4 unused Ethernet pins 4,5(+) and 7,8(-). The Ethernet spec supports distances up to 100m (328 feet).
TP-DCDC-4848-HP 36-72VDC IN 56VDC OUT 30W Hi Power DC to DC Converter and PoE inserter. DATA SHEET
TP-DCDC-4848G-HP Gigabit 36-72VDC IN 56VDC OUT 50W Hi Power DC to DC Converter and PoE inserter. DATA SHEET
TP-DCDC-4848GD-HP Gigabit 802.3at, +/- 36-72VDC IN 56VDC OUT 35W Hi Power DC to DC Converter and PoE inserter. DATA SHEET
POE-EXT-GD-HP
The POE-EXT-GD-HP is a high quality, high power, shielded Gigabit Ethernet and PoE extender to be able to extend Ethernet beyond the standard 100m limit. By using multiple units, Ethernet and PoE can be extended up to 300m over CAT5/CAT6 cables. The units are powered by PoE so no additional power source is required. Units can accept Mode A (Pins 1,2,3,6) or Mode B (Pins 4,5,7,8) PoE: 802.3af, 802.3at or 48V Passive PoE.
The rugged outdoor weatherproof enclosures are powder coated aluminum and are rated to IP66. The units meet outdoor temperature ratings of -25C to +55C.
TP-DCDC-2424GR-VHP
The Gigabit compatible TP-DCDC-2424GR-VHP are special very high power DC to DC converters / PoE inserters designed especially for Ubiquiti airFiber x™ wireless radio systems and other systems which require high power passive PoE (High PoE). The unique PoE inserter supplies 24VDC PoE power on all 8 Ethernet wires (4 pair) with the following pinout: 1,2,4,5 V+ and 3,6,7,8 V
They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated.
POE-PowerTap
Taps into passive PoE power on RJ45 connectors and outputs to a wire terminal connection. Pins 4,5 and 7,8. Can also be used to inject power.
Tycon Power Systems
The POE-PowerTap is a unique tool that allows monitoring or testing of PoE voltages, Extracting PoE voltage from a PoE switch or injector or Injecting PoE voltages to a CAT5 cable. The POE-PowerTap is outfitted with a wire terminal connector for up to 12awg wire.
TP-SW5G-NC
Universal Voltage 10/100/1000MB PoE Switch. Switch accepts universal voltage (12- 57VDC) via the wire terminal connector on the back of the switch. Also accepts 12-57VDC (1A max) Passive PoE input on port 5. 1A per port
On the universal voltage models (“-NC”) the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.
Tycon Power® sells a variety of power supplies in 60W, 120W and 180W sizes. 18VDC, 24VDC and 48VDC are available. All the Switches have DIN Rail mounts included for convenient DIN rail mounting.
TPW-400DT-12/24
The BreezePro® Wind Turbines from Tycon Solar® are lightweight at less than 10.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are 12V/24V auto voltage select.
TP-DCDC-4824-HP 36-72VDC IN 24VDC OUT 30W Hi Power DC to DC Converter and PoE inserter. DATA SHEET
TP-DCDC-4824G-HP Gigabit 36-72VDC IN 24VDC OUT 30W Hi Power DC to DC Converter and Passive PoE inserter.
TP-VR-2412
The TP-VR series of sealed DC to DC regulators offer high output regulation in a compact sealed enclosure. They have 12" long 18AWG leads on input and output for universal connectivity.
TP-SW5GD-BT
The TP-SW5GD-BT Power over Ethernet (PoE) 5 Port Gigabit switch offered by Tycon® is a fully automatic high speed Layer 2 Ethernet switch with one 802.3bt PoE input and four 802.3at PoE outputs. Ports 1-4 are 802.3at 35W PoE Out. The Uplink Port 5, is 802.3bt compatible so the switch can accept up to 100W PoE on 4 pairs to power the switch and connected devices remotely over CAT5 or higher Ethernet Cable. The Ethernet spec supports distances up to 100m (328ft). By using as a repeater, 200m total distance is realistic.
The switch can accept power via three different interfaces: Wire Terminal Connector, 4 pin Mini DIN connector or via 802.3at/bt PoE input to Uplink Port 5. Two different power inputs can be used for redundancy. The higher voltage takes priority.
TP-DCDC-1248 9-36VDC IN 48V PoE OUT 24W DC to DC Converter and PoE inserter DATA SHEET
TP-DCDC-1248-M 9-36VDC IN 48VDC OUT 24W DC to DC Converter and PoE inserter. Black Metal Enclosure. Industrial Applications. DATA SHEET
TP-DCDC-1248G Gigabit 9-36VDC IN 48V PoE OUT 24W DC to DC Converter and PoE inserter. DATA SHEET
TP-DCDC-1248D 9-36VDC IN 48VDC OUT 17W DC to DC Converter and 802.3af PoE inserter. DATA SHEET
TP-DCDC-1248GD Gigabit 9-36VDC IN 48VDC OUT 17W DC to DC Converter and 802.3af PoE inserter. DATA SHEET
TP-DCDC-1248GD-M Gigabit 9-36VDC IN 48VDC OUT 17W DC to DC Converter and 802.3af PoE inserter. Metal Enclosure. DATA SHEET