PoE Injector, 24VDC, 24W

POE-24-24W

PoE Injector, 24VDC, 24W

PoE Adapters power Ubiquiti products that support passive PoE.

DATA SHEET

POE-24-24W

Write your review

PoE Injector, 24VDC, 24W

POE-24-24W

PoE Injector, 24VDC, 24W

PoE Adapters power Ubiquiti products that support passive PoE.

DATA SHEET

Write your review

16 other products in the same category

24VDC to 56VDC 70W DCDC Voltage Converter

Brands: Tycon Systems

TP-VRHP-2456

Voltage Converter 18-36VDC Input, 56VDC @ 1.5A 70W Regulated output. 

The TP-VRHP-2456 is a 70W voltage converter/regulator which accepts an input of plus or minus +/-18VDC to 36VDC and provides a regulated output of 56VDC @ 1.25A 70W. These units are perfect for providing 56VDC voltage from -24VDC telecom power. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C (-22 deg F to 149 deg F). 

DATA SHEET

24VDC to 56VDC 250W DCDC Voltage Converter

Brands: Tycon Systems

TP-VRHP-2456-250

Voltage Converter 18-36VDC Input, 56VDC @ 4.46A 250W Regulated output. 

The TP-VRHP-2456-250 is a high power 250W voltage converter/regulator which accepts an input of plus or minus 18VDC to 36VDC and provides a regulated output of 56VDC @ 4.46A 250W. These units are perfect for providing 56VDC voltage from 24VDC battery banks. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C.

DATA SHEET

Managed Industrial 10 Port PoE+ Switch

Brands: Tycon Systems

TP-SW8G-2SFP

The TP-SW8G-2SFP Power over Ethernet (PoE) 10 port Gigabit switch offered by Tycon® is a fully automatic high speed Layer 2+ Ethernet manageable switches. The 10 port model has 8 PoE + 2 SFP ports. The PoE ports are Mode A (pins 1,2,3,6) type and are manageable via the user interface. They can be set to PoE, PoE+ or OFF. Default is PoE+.

The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.

DATA SHEET

48VDC to 24VDC 70W DCDC Voltage Converter

Brands: Tycon Systems

TP-VRHP-4824

Voltage Converter 36-72VDC Input, 24VDC @ 2.5A 70W Regulated output. 

The TP-VRHP-4824 is a 70W voltage converter/regulator which accepts an input of 36VDC to 72VDC and provides a regulated output of 24VDC @ 3A 70W. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C. 

DATA SHEET

Outdoor Gigabit PoE Extender

Brands: Tycon Systems

POE-EXT-GD-HP

The POE-EXT-GD-HP is a high quality, high power, shielded Gigabit Ethernet and PoE extender to be able to extend Ethernet beyond the standard 100m limit. By using multiple units, Ethernet and PoE can be extended up to 300m over CAT5/CAT6 cables. The units are powered by PoE so no additional power source is required. Units can accept Mode A (Pins 1,2,3,6) or Mode B (Pins 4,5,7,8) PoE: 802.3af, 802.3at or 48V Passive PoE.

The rugged outdoor weatherproof enclosures are powder coated aluminum and are rated to IP66. The units meet outdoor temperature ratings of -25C to +55C.

DATA SHEET

48V 240W DIN Rail Industrial Power Supply

Brands: Tycon Systems

PSDIN-48-240W

The PSDIN Series of Industrial DIN Rail mount high efficiency switching power supplies operate over a wide temperature range of -40C to +70C. There are two models to supply 120W or 240W. The input is 90 to 264VAC auto-ranging with wire terminal connections. The output is 48VDC nominal with an adjustment range from 47VDC to 56VDC. There is a switch for single or parallel operation. Two 240W supplies operating in parallel will provide 480W total power. There is an alarm output to provide a dry contact closure to trigger an alarm if the DC output fails, like during a grid power failure. The relay is closed when DC output is normal and open when DC output is in fault condition due to overload or safety shutdown.

DATA SHEET

High Power PoE Gigabit Inserter, 56V 70W Passive PoE Out

Brands: Tycon Systems

TP-DCDC-4856G-VHP

The Gigabit compatible TP-DCDC-2456G-VHP and TP-DCDC4856G-VHP area special very high power DC to DC converters / PoE inserters designed especially for Ubiquiti airFiber™ antenna systems and other systems which require high power passive PoE such as Axis High Power PoE PTZ security cameras. The unique PoE inserter supplies 56VDC PoE power on all 8 Ethernet wires.

They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated.

DATA SHEET

5 Port 10/100Mb Passive PoE Switch

Brands: Tycon Systems

TP-SSW5-NC

Universal Voltage 10/100 PoE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch. This model is very compact at only 4”x5”x1.5”. 2A per port.

On the universal voltage models (“-NC”) the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.

Tycon Power® sells a variety of power supplies in 60W, 120W and 180W sizes. 18VDC, 24VDC and 48VDC are available. All the Switches have DIN Rail mounts included for convenient DIN rail mounting.

DATA SHEET

Gigabit DC to DC Converter

Brands: Tycon Systems

TP-DCDC-4824G

The TP-DCDC Gigabit Series of DC to DC converters offered by Tycon Power® are a low cost and high efficiency solution for those requiring IEEE802.3af or Passive Power over Ethernet from a 12VDC or 24VDC or 48VDC voltage source like a battery system or vehicle. They have an integrated POE injector to apply the power and data output to the CAT5 Ethernet cable. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications.

DATA SHEET

12VDC to 24VDC 70W DCDC Voltage Converter

Brands: Tycon Systems

TP-VRHP-1224

Voltage Converter 10-15VDC Input, 24VDC @ 3A 70W Regulated output. 

The TP-VRHP-1224 is a 70W voltage converter/regulator which accepts an input of plus or minus 10VDC to 15VDC and provides a regulated output of 24VDC @ 1.25A 70W. These units are perfect for providing 24VDC voltage from 12VDC battery source like in a vehicular application or remote power application. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C.

DATA SHEET