12/24VDC In, 18V Passive PoE Inserter

TP-DCDC-1218

9-36VDC IN, 18V 18W Passive PoE OUT, DC to DC Converter/PoE inserter. 10/100Mb.

The TP-DCDC-1218 DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 18VDC Power Over Ethernet voltage from a 12 or 24V battery system. 

They have an integrated PoE injector to apply the regulated 18VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

DATA SHEET

TP-DCDC-1218

Write your review

12/24VDC In, 18V Passive PoE Inserter

TP-DCDC-1218

9-36VDC IN, 18V 18W Passive PoE OUT, DC to DC Converter/PoE inserter. 10/100Mb.

The TP-DCDC-1218 DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 18VDC Power Over Ethernet voltage from a 12 or 24V battery system. 

They have an integrated PoE injector to apply the regulated 18VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

DATA SHEET

Write your review

16 other products in the same category

Brands: Tycon Systems

TP-DCDC-4848D-HP

+/- 36-72VDC IN, 56VDC OUT 802.3at 35W High Power DC to DC Converter/PoE+ inserter. 10/100Mb.

The TP-DCDC-4848D-HP DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a +/-48V battery system. 

The PoE inserters are 802.3af/at compatible. 

They have an integrated 10/100Mb PoE+ injector to apply the regulated 56VDC to the CAT5 Ethernet cable. The input voltage must be between 36VDC and 72VDC.

DATA SHEET

Brands: Tycon Systems

TP-DCDC-1256G-VHP Gigabit 10-60VDC IN 56VDC OUT 70W 4 Pair Hi Power DC to DC Converter and passive PoE inserter. Ubiquiti airFiber™ DATA SHEET

TP-DCDC-1256GD-VHP Gigabit 10-60VDC IN 56VDC OUT 70W 4 Pair Hi Power DC to DC Conv and 802.3at PoE inserter. For Axis Q60 series PTZ cameras. UPOE Compatible. DATA SHEET

TP-DCDC-1256GD-BT Gigabit 10-60VDC IN 56VDC OUT 70W 4 Pair Hi Power DC to DC Conv and 802.3bt PoE inserter. DATA SHEET

Brands: Tycon Systems

TP-DCDC-4824G

The TP-DCDC Gigabit Series of DC to DC converters offered by Tycon Power® are a low cost and high efficiency solution for those requiring IEEE802.3af or Passive Power over Ethernet from a 12VDC or 24VDC or 48VDC voltage source like a battery system or vehicle. They have an integrated POE injector to apply the power and data output to the CAT5 Ethernet cable. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications.

DATA SHEET

Brands: Tycon Systems

TP-POE-1824G

48V 802.3af/at Gigabit input, Switch Selectable 18V or 24V 24W Gigabit passive PoE output. Converts 802.3af/at PoE to passive PoE.

The TP-POE-1824G Power Over Ethernet 802.3af/at converter is a unique product allowing a customer to run a Passive PoE device from a standard 802.3af or at PoE switch. They accept 802.3af/at PoE in and provide a switch selectable 24W PoE output of 18VDC or 24VDC.

DATA SHEET

Brands: Tycon Systems

POE-PowerTap

Taps into passive PoE power on RJ45 connectors and outputs to a wire terminal connection. Pins 4,5 and 7,8. Can also be used to inject power.

Tycon Power Systems

The POE-PowerTap is a unique tool that allows monitoring or testing of PoE voltages, Extracting PoE voltage from a PoE switch or injector or Injecting PoE voltages to a CAT5 cable. The POE-PowerTap is outfitted with a wire terminal connector for up to 12awg wire.

DATA SHEET

Brands: Tycon Systems

TP-DCDC-4848GD

The TP-DCDC-4848GD Gigabit Series of DC to DC converters have an integrated Gigabit POE injector to apply the power and data output to the CAT5 Ethernet cable. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications. They accept gigabit data-in to a shielded RJ45 Jack and provide gigabit data-out and PoE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have power outputs up to 17W.

DATA SHEET

Brands: Tycon Systems

TP-DCDC-1224 9-36VDC IN 24V PoE OUT 24W DC to DC Converter and PoE inserter DATA SHEET

TP-DCDC-1224G Gigabit 9-36VDC IN 24V PoE OUT 20W DC to DC Converter and PoE inserter DATA SHEET

TP-DCDC-1224G-4P Gigabit 9-36VDC IN 24VDC 4 Pair PoE OUT 24W DC to DC Converter and PoE inserter

Brands: Tycon Systems

TPW-400DT-12/24

The BreezePro® Wind Turbines from Tycon Solar® are lightweight at less than 10.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are 12V/24V auto voltage select.

DATA SHEET

Brands: Tycon Systems

TP-SW8-NC

The TP-SW8-D Power over Ethernet 802.3af/at (PoE) 10/100Mb switch offered by Tycon Power® is a fully automatic high speed 8 port Ethernet switch.

The -NC version is a passive PoE model for devices which are not 802.3af/at compliant.

On the -NC version the PoE output voltage = the input voltage so it is universal in its application. The DC input power range can be from 12V to 57V. The units can be powered via 2 or 4 pair PoE to port 8 (2A max).

DATA SHEET

Brands: Tycon Systems

TP-DCDC-2424GR-VHP

The Gigabit compatible TP-DCDC-2424GR-VHP are special very high power DC to DC converters / PoE inserters designed especially for Ubiquiti airFiber x™ wireless radio systems and other systems which require high power passive PoE (High PoE). The unique PoE inserter supplies 24VDC PoE power on all 8 Ethernet wires (4 pair) with the following pinout: 1,2,4,5 V+ and 3,6,7,8 V

They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated.

DATA SHEET

Brands: Tycon Systems

TP-SW8G-2SFP

The TP-SW8G-2SFP Power over Ethernet (PoE) 10 port Gigabit switch offered by Tycon® is a fully automatic high speed Layer 2+ Ethernet manageable switches. The 10 port model has 8 PoE + 2 SFP ports. The PoE ports are Mode A (pins 1,2,3,6) type and are manageable via the user interface. They can be set to PoE, PoE+ or OFF. Default is PoE+.

The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.

DATA SHEET

Brands: Ubiquiti

F-POE-G2

Optical Data Transport for Outdoor POE Devices

The FiberPoE connects remote PoE devices and provides data and power using fiber and DC cabling.

DATA SHEET

Brands: Mikrotik

RBGPOE

PoE injector, for Gigabit LAN products

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device.

For using with any RouterBOARD that supports 9-48V PoE. 

The GPOE has shielded connectors.

DATA SHEET