802.3af/at PoE Converter, 18/24V Passive PoE Out

802.3af/at PoE Converter, 18/24V Passive PoE Out

TP-POE-1824

48V 802.3af/at input, Switch Selectable 18V or 24V 12W passive PoE output. 10/100Mb. Converts 802.3af PoE to passive PoE.

802.3af/at Converter - Converts 48V 802.3af/at PoE to 18/24VDC (switchable) Passive PoE

The TP-POE-1824 Power Over Ethernet 802.3af/at converter is a unique product allowing a customer to run a Passive PoE device from a standard 802.3af or at PoE switch. They accept 802.3af/at PoE in and provide a switch selectable 12W PoE output of 18VDC or 24VDC.

DATA SHEET

TP-POE-1824

Write your review

802.3af/at PoE Converter, 18/24V Passive PoE Out

TP-POE-1824

48V 802.3af/at input, Switch Selectable 18V or 24V 12W passive PoE output. 10/100Mb. Converts 802.3af PoE to passive PoE.

802.3af/at Converter - Converts 48V 802.3af/at PoE to 18/24VDC (switchable) Passive PoE

The TP-POE-1824 Power Over Ethernet 802.3af/at converter is a unique product allowing a customer to run a Passive PoE device from a standard 802.3af or at PoE switch. They accept 802.3af/at PoE in and provide a switch selectable 12W PoE output of 18VDC or 24VDC.

DATA SHEET

Write your review

16 other products in the same category

Brands: Tycon Systems

TP-DCDC-4856G-VHP

The Gigabit compatible TP-DCDC-2456G-VHP and TP-DCDC4856G-VHP area special very high power DC to DC converters / PoE inserters designed especially for Ubiquiti airFiber™ antenna systems and other systems which require high power passive PoE such as Axis High Power PoE PTZ security cameras. The unique PoE inserter supplies 56VDC PoE power on all 8 Ethernet wires.

They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated.

DATA SHEET

Brands: Tycon Systems

TP-SW5GD-BT

The TP-SW5GD-BT Power over Ethernet (PoE) 5 Port Gigabit switch offered by Tycon® is a fully automatic high speed Layer 2 Ethernet switch with one 802.3bt PoE input and four 802.3at PoE outputs. Ports 1-4 are 802.3at 35W PoE Out. The Uplink Port 5, is 802.3bt compatible so the switch can accept up to 100W PoE on 4 pairs to power the switch and connected devices remotely over CAT5 or higher Ethernet Cable. The Ethernet spec supports distances up to 100m (328ft). By using as a repeater, 200m total distance is realistic.

The switch can accept power via three different interfaces: Wire Terminal Connector, 4 pin Mini DIN connector or via 802.3at/bt PoE input to Uplink Port 5. Two different power inputs can be used for redundancy. The higher voltage takes priority.

DATA SHEET

Brands: Tycon Systems

TP-SW5G-VERSA

The TP-SW5G-VERSA Power over Ethernet (PoE) 5 Port Gigabit switch offered by Tycon® is a fully automatic high speed Layer 2 Ethernet switches with multiple function ports. Port 1 is a 60W 4pair High PoE port; Port 2,3,4 are 48V 30W 802.3at compatible ports; Port 5 is a 24V 12W Passive PoE port. This allows a customer to power up multiple PoE devices with different power requirements. The switch requires a 48-56VDC (4A) power input.

DATA SHEET

Brands: Tycon Systems

TP-DCDC-1218

9-36VDC IN, 18V 18W Passive PoE OUT, DC to DC Converter/PoE inserter. 10/100Mb.

The TP-DCDC-1218 DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 18VDC Power Over Ethernet voltage from a 12 or 24V battery system. 

They have an integrated PoE injector to apply the regulated 18VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

DATA SHEET

Brands: Tycon Systems

TP-SSW5-NC

Universal Voltage 10/100 PoE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch. This model is very compact at only 4”x5”x1.5”. 2A per port.

On the universal voltage models (“-NC”) the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.

Tycon Power® sells a variety of power supplies in 60W, 120W and 180W sizes. 18VDC, 24VDC and 48VDC are available. All the Switches have DIN Rail mounts included for convenient DIN rail mounting.

DATA SHEET

Brands: Tycon Systems

TP-VRHP-4824

Voltage Converter 36-72VDC Input, 24VDC @ 2.5A 70W Regulated output. 

The TP-VRHP-4824 is a 70W voltage converter/regulator which accepts an input of 36VDC to 72VDC and provides a regulated output of 24VDC @ 3A 70W. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C. 

DATA SHEET

Brands: Tycon Systems

TP-DCDC-4848D-HP

+/- 36-72VDC IN, 56VDC OUT 802.3at 35W High Power DC to DC Converter/PoE+ inserter. 10/100Mb.

The TP-DCDC-4848D-HP DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a +/-48V battery system. 

The PoE inserters are 802.3af/at compatible. 

They have an integrated 10/100Mb PoE+ injector to apply the regulated 56VDC to the CAT5 Ethernet cable. The input voltage must be between 36VDC and 72VDC.

DATA SHEET

Brands: Tycon Systems

POE-EXT-GD-HP

The POE-EXT-GD-HP is a high quality, high power, shielded Gigabit Ethernet and PoE extender to be able to extend Ethernet beyond the standard 100m limit. By using multiple units, Ethernet and PoE can be extended up to 300m over CAT5/CAT6 cables. The units are powered by PoE so no additional power source is required. Units can accept Mode A (Pins 1,2,3,6) or Mode B (Pins 4,5,7,8) PoE: 802.3af, 802.3at or 48V Passive PoE.

The rugged outdoor weatherproof enclosures are powder coated aluminum and are rated to IP66. The units meet outdoor temperature ratings of -25C to +55C.

DATA SHEET

Brands: Ubiquiti

USP-RPS

The UniFi SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure.

The USP-RPS continually monitors all attached devices. In the event of an internal AC/DC power supply failure, failover is automatic so your network continues to operate with no interruption in service. With a 950W DC power budget, the USP-RPS can protect a variety of high-power devices, including UniFi PoE switches. An integrated 1.3" color touchscreen LCM displays system information for convenient monitoring.

DATA SHEET

Brands: Tycon Systems

TP-MS4G-VHP

Gigabit Mid Span, Very High Power 1.8A per port, UniVolt™ PoE Injector.

The TP-MS4G-VHP mid span PoE power sources are used for supplying PoE and data to multiple devices from a central location such as an operations room or equipment cabinet. The PoE devices feature a separate data-in port coupled with a data out/PoE port. The PoE function is considered 4 Pair Passive PoE which is sometimes referred to as “High PoE”. The units support Gigabit Ethernet and are backward compatible to 10/100MB.

DATA SHEET