CAT6 Waterproof RJ45 gland connectors
Brands: Simplifi Networks
Simplifi CAT 6 Waterproof RJ45 gland connectors 5 pack
Simplifi CAT 6 Waterproof RJ45 gland connectors per piece
GPeR
GPeR
The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.
Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m). Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).
In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.
16 other products in the same category
Precision Alignment Kit 620
Brands: Ubiquiti
PAK-620
Precision Alignment Kit for PowerBeam 620 devices.
The Precision Alignment Kit enables extremely accurate aiming to optimize airFiber® and airMAX® Point-to-Point (PtP) links.
RBFTC11
Brands: Mikrotik
RBFTC11
Fiber to Copper converter, Outdoor case, 12-57V PoE with 802.3af/at support
The FTC is a simple Fiber to Copper converter. Unlike many other media converters available on market, it has outdoor waterproof case with lock screw, it\'s mounting bracket can be attached and locked with a screw from inside the case. Unit has 12-57V PoE with 802.3af/at support (with unshielded cross cable). Comes with PoE injector and power supply. Works only with Gigabit SFP connections.
Ethernet Surge Protector, Gen 2
Brands: Ubiquiti
ETH-SP-G2
Ethernet Surge Protector, Gen 2
The ETH-SP is engineered to protect any Power‑over‑Ethernet (PoE) or non‑PoE device with connection speeds of up to 1 Gbps.
airFiber 4x4 MIMO Multiplexer
Brands: Ubiquiti
AF-MPx4
Increase the amazing throughput of your airFiber link by up to 200% without the need of additional antennas. The AF-MPx4 is a MIMO multiplexer that combines two airFiber X radios on a single dish antenna for superior noise immunity performance, redundancy, and Gigabit+ throughput.
6U Rack Cabinet
Brands: Sopto
RACK-6U-FAN
6U Rack Cabinet, Tempered glazed front door, fan installed on top cover
Sopto Media Converter
Brands: Sopto
MEDCONV
Media Converter, 1 Fiber Port, 1 UTP Port 1G. SFP Port External Power Supply 220V AC
airFiber 8x8 MIMO Multiplexer
Brands: Ubiquiti
AF-MPx8
Increase the amazing throughput of your airFiber link by up to 400% without the need of additional antennas. The AF-MPx8 is a scalable MIMO multiplexer that combines multiple airFiber X radios on a single dish antenna for superior noise immunity performance, redundancy, and multi-Gigabit throughput.
AI-7C Optical fiber fusion Splicer
Brands: Signal Fire
AI-7C
It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial quad-core CPU and is currently one of the fastest fiber splicing machine in the market; with a 5-inch 800X480 high-resolution screen, the operation is simple and intuitive. 8 seconds speed core alignment splicing, 18 seconds heating, the working efficiency increased by 50% compared to ordinary splicing machines.
Complete with workers stool and full required tool kit for work, the splicer is suitable for use with SM, MM, bare fiber, pigtail, rubber-insulated and multi-fiber cable.
UniFi Switch Flex Utility
Brands: Ubiquiti
USW-Flex-Utility
The Switch Flex Utility is an outdoor weatherproof enclosure designed for use with the Switch Flex.
It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security.
Note: UniFi Switch Flex, USW-Flex, sold separately
9U Rack Cabinet
Brands: Sopto
RACK-9U
The wall-mounted cabinet is small in size and saves space. It is suitable for small-scale integrated wiring projects such as building wiring, intelligent community, schools and buildings.
AI-9 Optical Fiber Fusion Splicer
Brands: Signal Fire
AI-9
It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial quad-core CPU and is currently one of the fastest fiber splicing machine in the market; with a 5-inch 800X480 high-resolution screen, the operation is simple and intuitive. 6 seconds speed core alignment splicing, 15 seconds heating, the working efficiency increased by 50% compared to ordinary splicing machines.
Complete with workers stool and full required tool kit for work, the splicer is suitable for use with SM, MM, bare fiber, pigtail, rubber-insulated and multi-fiber cable.
Ubiquiti Installer
Brands: Ubiquiti
U-Installer
Ubiquiti Installer
The U-Installer is a useful tool to make airMAX CPE installation easier. It provides Wi-Fi connectivity and 24V PoE power to a CPE, so you can use the intuitive UNMS Mobile app on a smartphone or tablet for alignment and configuration.
CAT6 UTP Patch Cord
Brands: Simplifi Networks
CAT6 UTP Network Patch Cord, 0.5M.
CAT6 UTP Network Patch Cord, 1M.
CAT6 UTP Network Patch Cord, 2M.
CAT6 UTP Network Patch Cord, 3M.
GPeR
The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.
Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m). Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).
In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.