

RB2011-H
The RB2011 wall mount kit (product code RB2011-H) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 desktop cases (models RB2011iL-IN, RB2011iLS-IN, RB2011UiAS-IN and RB2011UiAS-2HnD-IN), protects all ten Ethernet ports, SFP port and Serial port.
Note: only fits self crimped Ethernet cables; rubber feet must be removed from the router before fitting into the mount.
GPeR
The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.
Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m). Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).
In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.
RACK-42U
The 42U Rack’s door system includes a four-point locking system. The door can be easily rotated so it can be hinged from the left or right. The side panels can be screwed on, locked in place, or hinged to provide side door access.
CAT6 UTP Network Patch Cord, 0.5M.
CAT6 UTP Network Patch Cord, 1M.
CAT6 UTP Network Patch Cord, 2M.
CAT6 UTP Network Patch Cord, 3M.
ETH-SP-G2
Ethernet Surge Protector, Gen 2
The ETH-SP is engineered to protect any Power‑over‑Ethernet (PoE) or non‑PoE device with connection speeds of up to 1 Gbps.
AI-7C
It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial quad-core CPU and is currently one of the fastest fiber splicing machine in the market; with a 5-inch 800X480 high-resolution screen, the operation is simple and intuitive. 8 seconds speed core alignment splicing, 18 seconds heating, the working efficiency increased by 50% compared to ordinary splicing machines.
Complete with workers stool and full required tool kit for work, the splicer is suitable for use with SM, MM, bare fiber, pigtail, rubber-insulated and multi-fiber cable.
Simplifi CAT 6 Waterproof RJ45 gland connectors 5 pack
Simplifi CAT 6 Waterproof RJ45 gland connectors per piece
INS-8023AF-O
Instant 802.3af Adapters
Instant 802.3af Converters transform passive PoE devices into 802.3af-compliant products.
RBFTC11
Fiber to Copper converter, Outdoor case, 12-57V PoE with 802.3af/at support
The FTC is a simple Fiber to Copper converter. Unlike many other media converters available on market, it has outdoor waterproof case with lock screw, it\'s mounting bracket can be attached and locked with a screw from inside the case. Unit has 12-57V PoE with 802.3af/at support (with unshielded cross cable). Comes with PoE injector and power supply. Works only with Gigabit SFP connections.
USW-Flex-Utility
The Switch Flex Utility is an outdoor weatherproof enclosure designed for use with the Switch Flex.
It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security.
Note: UniFi Switch Flex, USW-Flex, sold separately
AI-9
It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial quad-core CPU and is currently one of the fastest fiber splicing machine in the market; with a 5-inch 800X480 high-resolution screen, the operation is simple and intuitive. 6 seconds speed core alignment splicing, 15 seconds heating, the working efficiency increased by 50% compared to ordinary splicing machines.
Complete with workers stool and full required tool kit for work, the splicer is suitable for use with SM, MM, bare fiber, pigtail, rubber-insulated and multi-fiber cable.
U-Installer
Ubiquiti Installer
The U-Installer is a useful tool to make airMAX CPE installation easier. It provides Wi-Fi connectivity and 24V PoE power to a CPE, so you can use the intuitive UNMS Mobile app on a smartphone or tablet for alignment and configuration.
PAK-620
Precision Alignment Kit for PowerBeam 620 devices.
The Precision Alignment Kit enables extremely accurate aiming to optimize airFiber® and airMAX® Point-to-Point (PtP) links.
RACK-9U
The wall-mounted cabinet is small in size and saves space. It is suitable for small-scale integrated wiring projects such as building wiring, intelligent community, schools and buildings.