LtAP LTE6 kit

LtAP LTE6 kit

RBLtAP-2HnD&R11e-LTE6

LtAP LTE6 kit is a compact 4G (LTE) capable weatherproof wireless access point – perfect for busy urban environment or off-the-grid outdoors networking. It has a built-in CAT6 cellular modem that supports 4G (LTE) connectivity out of the box – with up to 300 Mbps download speed!

CAT6 also enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside.

DATA SHEET

RBLtAP-2HnD&R11e-LTE6

Write your review

LtAP LTE6 kit

RBLtAP-2HnD&R11e-LTE6

LtAP LTE6 kit is a compact 4G (LTE) capable weatherproof wireless access point – perfect for busy urban environment or off-the-grid outdoors networking. It has a built-in CAT6 cellular modem that supports 4G (LTE) connectivity out of the box – with up to 300 Mbps download speed!

CAT6 also enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside.

DATA SHEET

Write your review

16 other products in the same category

Brands: Mikrotik

RB912R-2nD-LTm&R11e-LTE

The LtAP mini LTE kit is a small waterproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity on International LTE bands 1,2,3,7,8,20,38 and 40.

Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.

DATA SHEET

Brands: Mikrotik

RBwAPR-2nD&R11e-LTE

The wAP LTE is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices.

LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for larger coverage. Unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, very handy in mobile devices like car, bus or train.

DATA SHEET

Brands: Teltonika

TRB245

The TRB245 can be used to integrate modern and legacy industrial equipment in one solution via RS232 or RS485 interfaces. It features a wide range of software features like SMS control, Firewall, OpenVPN, IPSec, RMS ensures that data can be reached securely.

Dual SIM functionality with auto-failover and a backup WAN ensure stable connectivity even if the primary connection is lost.

DATA SHEET

Brands: Teltonika

RUTX10

Teltonika created RUTX10 Enterprise router specially for small to mid-size office applications. It comes with Dual Band Wi-Fi 5 802.11ac, which is very suitable for high data transmission and robust wireless performance. It has all the latest security features and allows remote monitoring and control. Synergy between hardware and software makes this device an amazing performer in Enterprise solutions.

DATA SHEET

Brands: Mikrotik

RBLtAP-2HnD&R11e-4G

The new LtAP 4G kit is a compact 4G (LTE) capable weatherproof wireless access point – perfect for busy urban environment or off-the-grid outdoors networking. It has a built-in cellular modem that supports 4G (LTE) connectivity – no need for additional devices, it works out of the box.

Its high power 2.4 GHz 802.11b/g/n wireless capability provides secure access to LTE network from your phone or any other wireless device with up to 150 Mbps download speed. You can also use a Gigabit Ethernet LAN port for your wired devices. There are several power options – DC jack, POE-in and automotive.

DATA SHEET

Brands: Mikrotik

R11e-LTE6

The R11e-LTE6 is an LTE CAT6 modem that delivers up to 300 Mbps downlink and 50 Mbps uplink data rate with 3G and 2G network fallback. CAT6 also features carrier aggregation and allows the device to use multiple bands at the same time. This miniPCIe form factor modem is designed for international bands. It can be used with any of our products that have miniPCIe slot (exceptions RB800 and RB4011).

DATA SHEET

Brands: Mikrotik

RBwAPGR-5HacD2HnD

The wAP ac R is an extremely cost-effective dual-band (2.4 / 5 GHz) home access point based on our popular weatherproof wAP form factor. Enjoy wireless experience anywhere – indoors or outdoors! wAP ac LTE is designed to deliver strong and reliable connection in almost any situation and weather conditions. It can withstand temperatures from -30 C‎° to +60 C‎ and can be easily mounted on walls, ceilings or poles.

This device is powered by a four core 716 MHz CPU and 128 MB RAM, capable of handling heavy loads. Dual-chain 2.4 GHz and dual-chain 5GHz wireless for dual concurrent AP coverage will solve most interference issues in a crowded environment. 

DATA SHEET

Brands: Mikrotik

RBLHGR&R11e-LTE6

The new LHG LTE6 kit features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions.

DATA SHEET

Brands: Teltonika

TRB145

The TRB145 is a mission-critical LTE Cat 1 gateway, equipped with RS485 interface. Compact design and easy installation make this gateway perfect for applications, where a sole gadget must be remotely controlled over the RS485 serial interface.

Just like the rest of TRB products, TRB145 is engineered to be used in industrial applications. Therefore, it has a wide range of software features, such as SMS control, Firewall, Open VPN, IPsec, Teltonika Networks Remote Management System (RMS), and FOTA support.

DATA SHEET

Brands: Teltonika

RUT955

The RUT955 is a highly reliable industrial LTE Cat 4 router that delivers high performance and GNSS location capabilities. Ethernet, Digital, and Analogue I/O, RS232, RS485, GNSS (GPS), microSD, and USB interfaces allow for an incredible variety of industrial application scenarios. It is equipped with connectivity redundancy via Dual SIM failover. It comes with RutOS which is packed with advanced software features, like Modbus, SNMP, TR-069, NTRIP, MQTT, and multiple VPN services.

DATA SHEET

Brands: Mikrotik

RBSXTR&R11e-LTE6

The new SXT LTE6 features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. It also has two Micro SIM slots for backup link. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant.

DATA SHEET

Brands: Mikrotik

RBD53GR-5HacD2HnD&R11e-LTE6

hAP ac³ LTE6 kit features our newest CAT6 LTE modem. It enables carrier aggregation, allowing you to use the LTE connection with speed up to 300 Mbps. It works by using multiple LTE bands at the same time. A huge advantage when there are a lot of LTE users in the area. Depending on the service provider, we have seen Internet speed doubling after switching to CAT6.

With 5 Gigabit Ethernet ports, 256 MB of RAM and quadcore CPU, hAP ac³ LTE6 kit can satisfy even the biggest and most demanding households. There is a full-size USB port that you can use to add extra storage. The new enclosure allows mounting the device vertically or horizontally. A wall mount set is also included.

DATA SHEET

Brands: Teltonika

TCR100

The TCR100 represents Teltonika\'s extensive industrial IoT experience brought straight to your home. With 4G LTE-A technology you can use TCR100 as a primary or a backup connectivity source. Two Ethernet interfaces and Dual-band Wi-Fi allow to connect multiple devices with ease! TCR100 features connectivity indicators, Wi-Fi, and Wi-Fi Protected buttons for quick and simple setup. Reliable, secure and easy to use – TCR100 is the perfect choice for any home network.

DATA SHEET

Brands: Mikrotik

MTAO-LTE-5D-SQ

The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed.

DATA SHEET

Brands: Teltonika

TRB140

The TRB140 is an ultra-small, lightweight, and energy-efficient industrial gateway equipped with mission-critical LTE Cat 4 capabilities, Gigabit Ethernet interface, digital Inputs/Outputs, and micro-USB port. It is perfect for projects and applications where a sole gadget requires reliable internet connectivity. 

The TRB140 is specially engineered to be used in the industrial sector and has a wide range of software security features, such as SMS control, Firewall, Open VPN, IPsec, Remote Management System (RMS), and FOTA support.

DATA SHEET

Brands: Poynting

XPOL-2

High Gain Cross Polarised LTE MiMo Antenna 698MHZ-2700MHZ, Max Gain: 9 DBI

  • Futureproof wideband LTE antenna and Wi-Fi operational frequencies.
  • Backwards compatible with 3G, 2G technologies.
  • Two cross polarised antennas in one enclosure for optimal LTE performance.
  • Improves mobile network subscriber\'s user experience.
  • Increased connectivity stability
  • Weather- and vandal resistant enclosure

The antenna provides an innovative solution for 4G / 3G and 2G networks including Wi-Fi. It is a unique wall- or pole-mountable, dual polarised, full LTE band antenna. 

DATA SHEET