1/2-Circle Trunking End Cap Smooth-Fit

FLIB2010W 20x10mm Micro+ 1/2-Circle Trunking Internal Bend Clip-Over

FLIB3015W 30x15mm Mini 1/2-Circle Trunking Internal Bend Clip-Over

FLIB5025W 50x25mm 1/2-Circle Trunking Internal Bend Clip-Over

WALLDOG

DeWalt WallDOG Fire Rated Screws (pack of 100)

FC83H

Ideal for up to 3 x 8mm diameter cables, this versatile Cable Protector is supplied with connector pins so it can be cut to shorten, then reconnected or combined with other lengths to make longer runs.

The hazard stripe gives greater visibility to pedestrians.

Available in 1.8m and 9m rolls.

Supplied with connector pins, so lengths can be joined to make longer runs.

• Ideal for areas with regular foot traffic
• Protect cables, and address a common cause of trips and falls
• Prevent cable insulation damage/electrocution and risk of broken conductor strands­­
• 30mm x 10mm cavity
• Ribbed non-slip base, pre-split rear for ease of use
• Flexible PVC - Neat tapered design, lengths uncoil to lay flat
• No sharp kerb-effect, pedestrian friendly

DATA SHEET

RC30MM

No more miscut or ragged edges on trunking joints with the Ratchet Cutting tool. This quality cutting tool will provide a perfect cut every time, an essential part of any installers tool kit.

SSB28W Single Surface Box, 28mm

SSB35W Single Surface Box, 35mm

TSB28W Twin Surface Box, 28mm

TSB35W Twin Surface Box, 35mm

FC68B

The heavier gauge design of Medium Duty Floor Cable Protectors addresses cable trip hazards… while providing effective protection for cables. 

By minimising the risk of split insulation and damaged conductor strands, the danger of electrocution and hot spots (that create fire risks) is minimised also. 

Lengths are available as 1.8m or 9m options, and supplied with friction-fit connector pins so that they can be joined to make continuous runs when necessary.

• Ideal for areas with regular foot traffic
• Protect cables, and address a common cause of trips and falls
• 14mm x 9mm cavity
• Ribbed non-slip base, pre-split rear for ease of use
• Flexible PVC - Neat tapered design, lengths uncoil to lay flat
• Fully safety tested and certified to BS EN 60670-1:2005

DATA SHEET

CC-1

Light Duty Floor Cable Protectors are popular as a temporary solution to cover cables across open areas with light foot traffic.

The 17 x 9mm cavity can accommodate 2x 8mm outer diameter flex cables.

Available in 1.8m and 9m rolls.

• Ideal for areas with light foot traffic
• Address a common cause of trips, tugs and falls
• Can protect up to 2x 8mm diameter cables
• Ribbed non-slip base, pre-split rear for ease of use
• Flexible PVC - Supplied coiled in box; simply uncoil to lay flat
• Fully safety tested and certified to BS EN 60670-1:2005

DATA SHEET

RT5030W

50x25mm 1/2-Circle Trunking 50x25-3015mm Reducing Tee Smooth-Fit

SD12P/10

Speed-D clip -12 port- pack of 10

BA3015W

30x15mm Mini 1/2-Circle Trunking Box Adaptor Smooth-Fit

R2D3015W

D-Line 30 x 15mm Mini Trunking offers a subtle appearance to make surface cable installations look attractive! The ½-round shape can blend to resemble the natural top-section of skirting boards, while offering a modern solution for vertical cable drops and runs across ceilings.

Dimensions: 30mm (W) x 15mm (H)      Available in 2 and 3 Metre lengths

• Unique stylish ‘D-Line’ appearance
• Saves channelling walls
• Self-adhesive
• Clip-Over & Smooth-Fit accessories for perfect finish
• A smart alternative to traditional offers
• No sharp edges, gentle on impact
• Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

FLFB2010W 20x10mm Micro+ 1/2-Circle Trunking Flat Bend Clip-Over

FLFB3015W 30x15mm Mini 1/2-Circle Trunking Flat Bend Clip-Over

FLFB5025W 50x25mm 1/2-Circle Trunking Flat Bend Clip-Over

CP2010W 20x10mm Micro+ 1/2-Circle Trunking Coupler Smooth-Fit

CP3015W 30x15mm Mini 1/2-Circle Trunking Coupler Smooth-Fit

CP5025W 50x25mm 1/2-Circle Trunking Coupler Smooth-Fit

R2D5025W

D-Line 50 x 25mm Maxi is a versatile trunking, providing capacity for several cables.

A wide range of Clip-Over and Smooth-Fit accessories are available.

The size, capacity and range of colours makes this profile a market-leading solution that is ideal for many AV, electrical and datacoms projects.

Dimensions: 50mm (W) x 25mm (H)      Available in 2 and 3 Metre lengths

• Unique stylish ‘D-Line’ appearance
• Saves channelling walls
• Self-adhesive
• Clip-Over & Smooth-Fit accessories for perfect finish
• A smart alternative to traditional offers
• No sharp edges, gentle on impact
• Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

FLET2010W 20x10mm Micro+ 1/2-Circle Trunking Equal Tee Clip-Over

FLET3015W 30x15mm Mini 1/2-Circle Trunking Equal Tee Clip-Over

FLET5025W 50x25mm 1/2-Circle Trunking Equal Tee Clip-Over