airMAX RocketDish 3ft Radome

airMAX RocketDish 3ft Radome

RAD-RD3

Radome Cover for RocketDish, 3ft Diameter

RAD-RD3

Write your review

airMAX RocketDish 3ft Radome

RAD-RD3

Radome Cover for RocketDish, 3ft Diameter

Write your review

16 other products in the same category

Brands: Mikrotik

Sleeve30

The Sleeve30 kit for our mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna.

Sleeve30 Kit also reduces wind load and protects antenna reflector and feed from harsh environment, improving PtP link sustainability.

Sleeve30 shell is made of corrosion resistive, lightweight aluminum; front cover has excellent RF signal transparency. Includes aluminum shell, front cover, fasteners, silicone sealant.

DATA SHEET

Brands: RF Elements

STH-A45-USMA

The radiation pattern of StarterHorn™ A45 USMA has asymmetrical main lobe and zero side lobes. StarterHorn™ antennas offer great noise rejection needed for high-density AP clusters and dense co-location. StarterHorn™ antennas offer both waveguide and RP-SMA female connector interface allowing easy connectivity to any third-party radio on the market, incl direct connectivity to UI radios with an waveguide interface.

DATA SHEET

Brands: RF Elements

STH-30-USMA

StarterHorn™ Antennas have a symmetrical beam pattern with no side lobes. StarterHorn™ antennas offer great noise rejection for high-density AP clusters and dense co-location. StarterHorn™ antennas provide excellent performance in cost effective package. StarterHorn™ antennas offer RP-SMA female connector interface for H and V antenna polarizations for connectivity to any third party radio on the market. They also allow for use of UBNT radios with waveguide connector.

DATA SHEET

Brands: Poynting

LPDA-92

This high-gain wideband directional antenna covers all international cellular, mobile and wireless data bands including GSM 900/GSM1800/UMTS/LTE bands and 2.3-2.7GHz licensed and unlicensed data bands. Its configuration is suitable for various wireless communications systems.

This antenna is unique in its combination of ultra wide-band operator with a consistent high-gain performance. It has been successfully used in extreme weather environments in Africa and Europe with close to zero failures.

A firm favourite, in any area where operators are having signal challenges. It is ideal for any application using the GSM network (LTE/HSPA/3G/EDGE/GPRS).

DATA SHEET

Brands: Ubiquiti

AF-5G34-S45

5 GHz airFiber Dish, 34 dBi, Slant 45

The airFiber® X Antennas feature significant advances in noise isolation and beam performance to complement the airFiber X radios for carrier backhauls and Point-to-Point (PtP) bridging.

DATA SHEET

Brands: RF Elements

HG3-CC-S80

Symmetrical Horn Carrier Class Gen2 is a scalar horn with the same size of main beam in horizontal and vertical planes, equipped with N-female connectors. Since 2014, our horns address major weaknesses of mainstream sector antenna technologies and provide excellent noise rejection, network scalability, and throughput improvement.

DATA SHEET

Brands: RF Elements

HG3-CC-A90

Asymmetrical Horn CC Antennas provide unique asymmetrical beam shape while maintaining excellent noise rejection and overall excellent performance of a well designed horn antenna with N-female connectors. Enabling new levels of network scalability and throughput increase. Asymmetrical Horn CC antennas complement the successful Symmetrical Horn Antennas.

DATA SHEET

Brands: Mikrotik

MTAD-5G-30D3

mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate our Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.

DATA SHEET

Brands: Mikrotik

MTAD-5G-30D3-PA

mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate our Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.

DATA SHEET

Brands: RF Elements

HG3-CC-A60

Asymmetrical Horn CC Antennas provide unique asymmetrical beam shape while maintaining excellent noise rejection and overall excellent performance of a well designed horn antenna with N-female connectors. Enabling new levels of network scalability and throughput increase. Asymmetrical Horn CC antennas complement the successful Symmetrical Horn Antennas.

DATA SHEET

Brands: Poynting

XPOL-6-10M

LTE DIRECTIONAL CROSS POLARISED MIMO ANTENNA 1710MHZ-2700MHZ MAX GAIN: 11 DBI

  • Very high constant gain
  • Futureproof wideband LTE antenna and Wi-Fi operational frequencies
  • Backwards compatible with 3G and 2G technologies
  • Two antennas in one enclosure for optimal LTE performance
  • Increased connectivity stability

DATA SHEET

Brands: RF Elements

HG3-TP-A20-30

30° Asymmetrical Horn TP Antenna combines the best of both worlds - high gain of a traditional sector antenna and zero side lobes of a horn. Its radiation pattern is wide in azimuthal and narrow in elevation plane, greatly improving coverage planning options. 30° Asymmetrical Horn TP Antenna exceeds the traditional patch sector antenna thanks to high stability of gain and radiation pattern in the whole band of operation. Outstanding noise rejection and precision of radiation pattern favors 30° Asymmetrical Horn TP antenna for high-density AP clusters, in highly populated areas and dense co-location sites.

DATA SHEET

Brands: Poynting

XPOL-1

LTE OMNI DIRECTIONAL CROSS POL OUTDOOR ANTENNA 790MHZ – 960MHZ & 1710MHZ – 2700MHZMAX GAIN: 4 DBI

  • Futureproof omni-directional wideband LTE antenna
  • Backwards compatible with 3G, 2G technologies
  • Two antennas in one enclosure for optimal LTE performance
  • Improves mobile network subscriber’s user experience
  • Increased connectivity stability
  • Weather- and vandal proof enclosure
  • Pole, wall or window mountable

DATA SHEET

Brands: RF Elements

TP-ADAP-IS

The TwistPort™ Adaptor for PrismStation™ 5AC / IsoStation™ 5AC / IsoStation™ M5 makes the radios compatible with all TwistPort™ Antennas. TwistPort™ Adaptors are equipped with our original quick-locking waveguide port. Connecting and disconnecting the IsoStation™ radio series from the TwistPort™ Adaptor is very simple and requires no tools.

DATA SHEET

Brands: RF Elements

TP-ADAP-e2K

The TwistPort Adaptor for ePMP™ 2000 AP makes the ePMP™2000 series compatible with all TwistPort™ Antennas.

TwistPort™ Adaptors are equipped with our original quicklocking waveguide port. Connecting and disconnecting the ePMP™ 2000 AP into the TwistPort™ Adaptor is very simple and requires no tools

DATA SHEET