airFiber 4x4 MIMO Multiplexer

airFiber 4x4 MIMO Multiplexer

AF-MPx4

Increase the amazing throughput of your airFiber link by up to 200% without the need of additional antennas. The AF-MPx4 is a MIMO multiplexer that combines two airFiber X radios on a single dish antenna for superior noise immunity performance, redundancy, and Gigabit+ throughput.

DATA SHEET

AF-MPx4

Write your review

airFiber 4x4 MIMO Multiplexer

AF-MPx4

Increase the amazing throughput of your airFiber link by up to 200% without the need of additional antennas. The AF-MPx4 is a MIMO multiplexer that combines two airFiber X radios on a single dish antenna for superior noise immunity performance, redundancy, and Gigabit+ throughput.

DATA SHEET

Write your review

16 other products in the same category

Brands: Poynting

XPOL-2

High Gain Cross Polarised LTE MiMo Antenna 698MHZ-2700MHZ, Max Gain: 9 DBI

  • Futureproof wideband LTE antenna and Wi-Fi operational frequencies.
  • Backwards compatible with 3G, 2G technologies.
  • Two cross polarised antennas in one enclosure for optimal LTE performance.
  • Improves mobile network subscriber\'s user experience.
  • Increased connectivity stability
  • Weather- and vandal resistant enclosure

The antenna provides an innovative solution for 4G / 3G and 2G networks including Wi-Fi. It is a unique wall- or pole-mountable, dual polarised, full LTE band antenna. 

DATA SHEET

Brands: RF Elements

AS-5-20

RF elements® Array Sector antennas provide exceptional RF performance, colocation capability, ease of installation, and cost efficiency.

The antennas feature BackShield™, a frequency selective surface that attenuates the side lobes in the azimuth plane and back radiation, integrated directly in the antenna body.

Array Sector 5-20 operates in extremely wide frequency band, has balanced gain in both polarizations, and offers unmatched main lobe stability for superior coverage performance.

DATA SHEET

Brands: RF Elements

STH-30-USMA

StarterHorn™ Antennas have a symmetrical beam pattern with no side lobes. StarterHorn™ antennas offer great noise rejection for high-density AP clusters and dense co-location. StarterHorn™ antennas provide excellent performance in cost effective package. StarterHorn™ antennas offer RP-SMA female connector interface for H and V antenna polarizations for connectivity to any third party radio on the market. They also allow for use of UBNT radios with waveguide connector.

DATA SHEET

Brands: RF Elements

HG3-TP-S40

Symmetrical Horn TP Antennas Gen2 feature our industry-changing TwistPort™ connector, a patent-pending quick-locking waveguide port. TwistPort™ is virtually lossless and revolutionary easy to use.

Symmetrical Horn TP Antennas Gen2 feature multiple improvements on RF performance and industrial design, incl. optically lighter antenna body and significantly improved antenna bracket. Radome is made of more resistant material and the whole range of Gen2 antennas only uses two different radome sizes.

DATA SHEET

Brands: RF Elements

TP-ADAP-e2K

The TwistPort Adaptor for ePMP™ 2000 AP makes the ePMP™2000 series compatible with all TwistPort™ Antennas.

TwistPort™ Adaptors are equipped with our original quicklocking waveguide port. Connecting and disconnecting the ePMP™ 2000 AP into the TwistPort™ Adaptor is very simple and requires no tools

DATA SHEET

Brands: RF Elements

HG3-CC-S50

Symmetrical Horn Carrier Class Gen2 is a scalar horn with the same size of main beam in horizontal and vertical planes, equipped with N-female connectors. Since 2014, our horns address major weaknesses of mainstream sector antenna technologies and provide excellent noise rejection, network scalability, and throughput improvement.

DATA SHEET

Brands: Ubiquiti

ISO-BEAM-620

The IsoBeam™ 620 is an isolator radome that is available as an optional accessory for these dish antenna models:

  • RocketDish® RD-5G30-LW
  • PowerBeam™ PBE-5AC-620
  • PowerBeam PBE-M5-620
  • AF-5G30-S45

The innovative RF‑choke perimeter of the IsoBeam delivers superior noise immunity in co-location deployments; its perimeter corrugation provides enhanced RF shielding.

Brands: Mikrotik

Sleeve30

The Sleeve30 kit for our mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna.

Sleeve30 Kit also reduces wind load and protects antenna reflector and feed from harsh environment, improving PtP link sustainability.

Sleeve30 shell is made of corrosion resistive, lightweight aluminum; front cover has excellent RF signal transparency. Includes aluminum shell, front cover, fasteners, silicone sealant.

DATA SHEET

Brands: RF Elements

HG3-CC-S60

Symmetrical Horn Carrier Class Gen2 is a scalar horn with the same size of main beam in horizontal and vertical planes, equipped with N-female connectors. Since 2014, our horns address major weaknesses of mainstream sector antenna technologies and provide excellent noise rejection, network scalability, and throughput improvement.

DATA SHEET

Brands: Mikrotik

MTRADC

Radome Cover Kit is now available for our mANT 30dBi parabolic antennas!

It reduces wind load, protects reflector surfaces from harsh environment, protects the antenna feed from falling objects, as well as positively affects the antenna sustainability and operational life. It\'s made from a special material that has a low dielectric constant. Wide range of temperature and direct sunlight won\'t affect it.

Brands: Mikrotik

MTAS-5G-19D120

The new sector mANT antennas are the perfect companion for the BaseBox, NetBox, NetMetal or any other outdoor wireless device.

The mANT is a dual-polarization 19dBi 120 degree beamwidth antenna with two RP-SMA connectors. It comes with metallic U bolt type mounts.

DATA SHEET

Brands: RF Elements

HG3-TP-S60

Symmetrical Horn TP Antennas Gen2 feature our industry-changing TwistPort™ connector, a patent-pending quick-locking waveguide port. TwistPort™ is virtually lossless and revolutionary easy to use.

Symmetrical Horn TP Antennas Gen2 feature multiple improvements on RF  performance and industrial design, incl. optically lighter antenna body and significantly improved antenna bracket. Radome is made of more resistant material and the whole range of Gen2 antennas only uses two different radome sizes.

DATA SHEET