Filter By

Brand

Brand

Frequency

Frequency

LTE/3G

LTE/3G

Active filters

LtAP mini LTE kit

RB912R-2nD-LTm&R11e-LTE

The LtAP mini LTE kit is a small waterproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity on International LTE bands 1,2,3,7,8,20,38 and 40.

Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.

DATA SHEET

Omni Cellular OMNI-69-V3

All-Band LTE/Cellular Omni-Directional Antenna 790MHZ-960MHZ & 1710MHZ-2700MHZMAX Gain: 7 DBI

  • Compatible with 4G, 3G and 2G technologies, supports WiFi and WiMax
  • Ideal for machine to machine applications
  • Increased connectivity stability
  • Consistent high gain over a very wide frequency band
  • Suitable for marine applications
  • Vandal and water resistant enclosure

This high gain omni-directional antenna covers all cellular frequencies bands needed for LTE(4G), but also covers the bands for HSDPA, 3G, EDGE, GPRS and voice. Its configuration makes it suitable for fixed installations of any cellular frequency band.

Data Sheet

RUT240

RUT240

RUT240 is a compact, cost-effective and powerful industrial LTE router for professional applications. Router delivers high performance for mission-critical cellular communication. Equipped with external SIM holder and signal strength status LEDs, it ensures easy network management. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.

Standard package contains

-Router RUT240

-Euro PSU

-2 x LTE antennas (swivel, SMA male)

-1 x WiFi antenna (swivel, RP-SMA male)

-Ethernet cable (1.5 m)

-QSG (Quick Start Guide)

-Packaging box

DATA SHEET

RUT850

RUT850 

RUT850 is a compact and slim design LTE wireless router. It supports latest IEEE802.11n and IEEE802.11b/g WLAN standards and provides wireless transmitting and receiving rate up to 150 Mbps. LTE – up to 150 Mbps DL and 50 Mbps UL.

Standard package contains

-Router RUT850

-Power cable (2 m)

-2 x LTE antennas (adhesive, FAKRA-D, 3 m cable)

-1 x GNSS antenna (adhesive, FAKRA-C, 3 m cable) – only for GNSS version

-2 x screws

-2 x adhesive tape profiles

-2 x hook and loop profiles

-QSG (Quick Start Guide)

-Packaging box

DATA SHEET

RUT950

RUT950

RUT950 is highly reliable and secure LTE router for professional applications. Router delivers high performance, mission-critical cellular communication. RUT950 is equipped with connectivity redundancy through dual SIM failover. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.  

Standard package contains 

-Router RUT950

-Euro PSU

-2 x LTE antennas (swivel, SMA male)

-2 x WiFi antennas (swivel, RP-SMA male)

-Ethernet cable (1.5 m)

-QSG (Quick Start Guide)

-Packaging box

DATA SHEET

SXT LTE Kit

The SXT LTE kit (product code RBSXTR&R11e-LTE) is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant.

The device has a built in high quality 2G/3G/4G/LTE Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro SIM slots for backup link.

Data Sheet

wAP LTE kit

RBwAPR-2nD&R11e-LTE

The wAP LTE is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices.

LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for larger coverage. Unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, very handy in mobile devices like car, bus or train.

DATA SHEET

XPOL-2

High Gain Cross Polarised LTE MiMo Antenna 698MHZ-2700MHZ, Max Gain: 9 DBI

  • Futureproof wideband LTE antenna and Wi-Fi operational frequencies.
  • Backwards compatible with 3G, 2G technologies.
  • Two cross polarised antennas in one enclosure for optimal LTE performance.
  • Improves mobile network subscriber\'s user experience.
  • Increased connectivity stability
  • Weather- and vandal resistant enclosure

The antenna provides an innovative solution for 4G / 3G and 2G networks including Wi-Fi. It is a unique wall- or pole-mountable, dual polarised, full LTE band antenna. 

This is a cost-effective solution for enhancing signal reception and throughput. The XPOL-2 antenna increases signal reliability ensuring higher data throughput for users and provides a stable, high-quality connection.

Yagi Cellular LPDA-92

This high-gain wideband directional antenna covers all international cellular, mobile and wireless data bands including GSM 900/GSM1800/UMTS/LTE bands and 2.3-2.7GHz licensed and unlicensed data bands. Its configuration is suitable for various wireless communications systems.

This antenna is unique in its combination of ultra wide-band operator with a consistent high-gain performance. It has been successfully used in extreme weather environments in Africa and Europe with close to zero failures.

A firm favourite, in any area where operators are having signal challenges. It is ideal for any application using the GSM network (LTE/HSPA/3G/EDGE/GPRS).

Data Sheet