Filter By

Brand

Brand

PoE & Power Solutions

PoE & Power Solutions

Active filters

10-60VDCin, Dual Channel 802.3at Gigabit PoE Inserter, 70W

TP-DCDC-1256GD-VHP

Gigabit +/- 10-60VDC IN, 56VDC OUT Dual channel 802.3at PoE, 70W 

Features

- Input Voltage +/- 10-60VDC; Output 56VDC Dual Channel 802.3at, 70W

- Integrated Gigabit PoE+ Inserter

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation 60°C

- Removable Wire Terminal Input for up to 12AWG wires

The Gigabit compatible TP-DCDC-1256G-VHP and TP-DCDC1256GD-VHP are special very high power DC to DC converters / POE inserters designed especially for higher power PoE applications. The TP-DCDC-1256GD-VHP has dual channel 802.3at output for PTZ Cameras like the Axis 6000 series.

DATA SHEET 

10-60VDCin, Passive Gigabit PoE Inserter

TP-DCDC-1256G-VHP

Gigabit +/- 10-60VDC IN, 56VDC OUT Passive.

Features

- Input Voltage +/- 10-60VDC; Output 56VDC Passive

- Integrated Gigabit PoE+ Inserter

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation 60°C

- Removable Wire Terminal Input for up to 12AWG wires

The Gigabit compatible TP-DCDC-1256G-VHP and TP-DCDC1256GD-VHP area special very high power DC to DC converters / POE inserters designed especially for Ubiquiti airFiber™ antenna systems and other systems which require high power passive POE such as Axis High Power POE PTZ security cameras. The unique POE inserter supplies 56VDC POE power on all 8 Ethernet wires (4 Pair). 

DATA SHEET

10/100Mb Passive PoE Y Injector

POE-YINJ-S

10/100Mb Passive Y Injector supplies PoE power on RJ45 Connector Pins 4,5 (+) 7,8 (-). Injects DC power to both RJ45 connectors. Shielded. Black.

The Passive Y Injector receives DC power on the 5.5x2.1mm DC Barrel connector and routes to both RJ45 Connectors on pins 4/5(+) and 7/8(-).

It provides PoE power and data on both the RJ45 connectors.

The Y Injector is used for those applications where customer needs to route PoE power to two connected devices from a DC source like a battery or grid connected power supply.

DATA SHEET

10/100Mb Shielded Passive Injector

POE-INJ-S

10/100Mb Passive PoE Injector. Injects DC power to RJ45 Socket Pins 4,5 (+) 7,8 (-). Shielded. Black.

Features include: 

- Shielded CAT5e cable and connectors add protection against surges and interference. 

- Cat5 rated RJ45 jack for more reliable high speed data connections (10/100MB) 

- Shrouded DC jack for improved safety

e POE-INJ-S is a low cost Power Over Ethernet (PoE) Inserter to insert PoE power to a CAT5 ethernet data cable on the unused ethernet pins 4,5(+) and 7,8(-).

The DC Input / Output voltage can be up to 57 V depending on the power supply used. The PoE voltage equals the input voltage.

Supports Passive POE distances up to 100m (328feet).

DC connector is 5.5x2.1mm size. Total length of part is 10".

DATA SHEET

12/24VDC In, 18V Passive PoE Inserter

TP-DCDC-1218

9-36VDC IN, 18V 18W Passive PoE OUT, DC to DC Converter/PoE inserter. 10/100Mb.

Features

- Input Voltage 9-36VDC; Output 18VDC Passive PoE

- High Power 18W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-1218 DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 18VDC Power Over Ethernet voltage from a 12 or 24V battery system. 

They have an integrated PoE injector to apply the regulated 18VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

DATA SHEET

12/24VDC In, 24V Passive PoE Inserter

TP-DCDC-1224

9-36VDC IN, 18V 18W Passive PoE OUT, DC to DC Converter/PoE inserter. 10/100Mb.

Features

- Input Voltage 9-36VDC; Output 24VDC Passive PoE

- High Power 19W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-1224 DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 24VDC Power Over Ethernet voltage from a 12 or 24V battery system. 

They have an integrated PoE injector to apply the regulated 24VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

They accept data-in to a shielded RJ45 Jack and provide data-out and PoE power on the shielded RJ45 output jack.

DATA SHEET

12/24VDC In, 48V 802.3af Gigabit PoE Inserter. Metal Case.

TP-DCDC-1248GD-M

Gigabit 9-36VDC IN 48VDC OUT 17W DC to DC Converter and 802.3af PoE inserter. Metal Enclosure

Features

- Metal Enclosure.

- Input Voltage 9-36VDC; Output 48VDC

- Integrated Gigabit 802.3af PoE Inserter

- High Power 17W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation

- Removable Wire Terminal Input for up to 12AWG wires

802.3af Compatible. Will only power up when connected to an 802.3af device.

DATA SHEET

12/24VDC In, 48V 802.3af Gigabit PoE Inserterter

TP-DCDC-1248GD

Gigabit 9-36VDC IN 48VDC OUT 17W DC to DC Converter and 802.3af PoE inserter.

Features

- Input Voltage 9-36VDC; Output 48VDC

- Integrated Gigabit 802.3af PoE Inserter

- High Power 17W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation

- Removable Wire Terminal Input for up to 12AWG wires

802.3af Compatible. Will only power up when connected to an 802.3af device.

The TP-DCDC-1248GD DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC 802.3af Power Over Ethernet voltage from a 12 or 24V battery system. 

DATA SHEET

12/24VDC In, 48V 802.3af PoE Inserter

TP-DCDC-1248D

9-36VDC IN, 48V 17W 802.3af PoE OUT, DC to DC Converter/PoE inserter. 10/100Mb.

Features

- Input Voltage 9-36VDC; Output 48VDC

- Integrated 802.3af PoE Inserter

- High Power 17W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation

- Removable Wire Terminal Input for up to 12AWG wires

802.3af Compatible. Will only power up when connected to an 802.3af device.

The TP-DCDC-1248D DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC 802.3af Power Over Ethernet voltage from a 12 or 24V battery system. 

They have an integrated 802.3af PoE injector to apply the regulated 48VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

DATA SHEET

12/24VDC In, 48V Passive Gigabit PoE Inserter

TP-DCDC-1248G

9-36VDC IN 48VDC OUT 17W DC to DC Convert

Features

- Input Voltage 9-36VDC; Output 48VDC

- Integrated Gigabit PoE Inserter

- High Power 19W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-1248G DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Passive voltage from a 12 or 24V battery system. 

They have an integrated Gigabit passive PoE injector to apply the regulated 48VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

DATA SHEET

12/24VDC In, 48V Passive PoE Inserter

TP-DCDC-1248

9-36VDC IN, 48V 24W Passive PoE OUT, DC to DC Converter/PoE inserter. 10/100Mb.

Features

- Input Voltage 9-36VDC; Output 48VDC Passive PoE

- High Power 24W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-1248 DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a 12 or 24V battery system. 

DATA SHEET

12/24VDC In, 48V Passive PoE Inserter, Metal Case

TP-DCDC-1248-M

9-36VDC IN, 48VDC 24W Passive PoE OUT, DC to DC Converter/PoE inserter. 10/100Mb. Black Metal Enclosure. Industrial Applications.

Features

- Input Voltage 9-36VDC; Output 48VDC Passive PoE

- Metal Case

- High Power 24W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-1248-M DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a 12 or 24V battery system. 

DATA SHEET

12V In, Dual Output 802.3at PoE Inserter

TP-DCDC-1248Dx2-HP

10-15VDC IN, Qty 2 802.3af/at 56VDC 21W OUT, DC to DC Converter / PoE inserter.

Features

- Input Voltage 12VDC  (10-15VDC)

- Dual 802.3af/at outputs. 42W Total.

- Surge Protected to 15kV

- Dual DC Inputs for Connecting 2 Power Sources

- 10/100Mb Data Compatibility, Shielded Connectors

- Short Circuit, Over Current and Reverse/Over Voltage Protection

- Industrial Temperature Range 70°C

- DIN Rail Mountable

The TP-DCDC-1248DX2-HP are unique high power PoE injectors with Dual 802.3af/at compatible outputs. This means that two devices can be powered from a single PoE injector. The data path between the units is handled by the injector so no PoE switch is required.

DATA SHEET

12VDC to 24VDC 70W DCDC Voltage Converter

TP-VRHP-1224

Voltage Converter 10-15VDC Input, 24VDC @ 3A 70W Regulated output. 

The TP-VRHP-1224 is a 70W voltage converter/regulator which accepts an input of plus or minus 10VDC to 15VDC and provides a regulated output of 24VDC @ 1.25A 70W. These units are perfect for providing 24VDC voltage from 12VDC battery source like in a vehicular application or remote power application. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C.

DATA SHEET

12VDC to 56VDC 70W DCDC Voltage Converter

TP-VRHP-1256

Voltage Converter 10-15VDC Input, 56VDC @ 1.25A 70W Regulated output. 

The TP-VRHP-1256 is a 70W voltage converter/regulator which accepts an input of plus or minus 10VDC to 15VDC and provides a regulated output of 56VDC @ 1.25A 70W. These units are perfect for providing 56VDC voltage from 12VDC battery source like in a vehicular application or remote power application. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C. 

DATA SHEET

12VDCin, 24V Passive PoE Inserter

TP-DCDC-1224-HP

+/- 10-15VDC IN, 24VDC OUT 30W High Power DC to DC Converter/PoE inserter. 10/100Mb.

Features

- Input Voltage +/- 10-15VDC; Output 24VDC Passive PoE

- Integrated 10/100Mb PoE Inserter

- High Power 30W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation 60°C

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-1224-HP DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 24VDC Power Over Ethernet voltage from a +/-12V battery system. 

They have an integrated 10/100Mb Passive PoE injector to apply the regulated 24VDC to the CAT5 Ethernet cable. The input voltage must be between 10VDC and 15VDC.

DATA SHEET

12VDCin, 802.3at Gigabit PoE+ Inserter

TP-DCDC-1248GD-HP

Gigabit +/- 10-15VDC IN, 56VDC OUT 802.3at 35W High Power DC to DC Converter/PoE+ inserter. 

Features

- Input Voltage +/- 10-15VDC; Output 56VDC 802.3at

- Integrated Gigabit PoE+ Inserter

- High Power 35W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation 60°C

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-1248GD-HP DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a +/-12V battery system. 

12VDCin, Passive Gigabit PoE Inserter

TP-DCDC-1248G-HP

Gigabit +/- 10-15VDC IN, 56VDC OUT Passive 50W High Power DC to DC Converter/PoE+ inserter. 

Features

- Input Voltage +/- 10-15VDC; Output 56VDC Passive

- Integrated Gigabit PoE+ Inserter

- High Power 50W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation 60°C

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-1248G-HP DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a +/-12V battery system. 

DATA SHEET

24V In, Dual Output 802.3at PoE Inserter

TP-DCDC-2448Dx2-HP

18-36VDC IN, Qty 2 802.3af/at 56VDC 35W OUT, DC to DC Converter / PoE inserter.

Features

- Input Voltage 24VDC  (18-36VDC)

- Dual 802.3af/at outputs. 70W Total.

- Surge Protected to 15kV

- Dual DC Inputs for Connecting 2 Power Sources

- 10/100Mb Data Compatibility, Shielded Connectors

- Short Circuit, Over Current and Reverse/Over Voltage Protection

- Industrial Temperature Range 70°C

- DIN Rail Mountable

The TP-DCDC-2448DX2-HP are unique high power PoE injectors with Dual 802.3af/at compatible outputs. This means that two devices can be powered from a single PoE injector. The data path between the units is handled by the injector so no PoE switch is required.

DATA SHEET

24VDC to 12VDC 15W DCDC Voltage Converter

TP-VR-2412

Voltage Converter 18-32VDC Input, 12V @ 1.25A regulated output. 15W. 12" 18AWG lead wires.

The TP-VR-2412 is a 15W voltage converter/regulator which accepts an input of 18VDC to 36VDC and provides a regulated output of 12VDC @ 1.25A 15W. These units are perfect for providing stable regulated 12VDC voltage from 24VDC battery banks. 

18-36VDC Input

12VDC @ 1.25A Output, 15W

Flying Leads for input and output: 12inches, 18AWG

-40 to +65C Operation

DATA SHEET

24VDC to 24VDC 70W DCDC Voltage Converter

TP-VRHP-2424

Voltage Converter 18-36VDC Input, 24VDC @ 2.9A 70W Regulated output. 

he TP-VRHP-2424 is a 70W voltage converter/regulator which accepts an input of plus or minus 18VDC to 36VDC and provides a regulated output of 24VDC @ 2.9A 70W. These units are perfect for providing stable regulated 24VDC voltage from 24VDC battery banks. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C.

DATA SHEET

24VDC to 56VDC 250W DCDC Voltage Converter

TP-VRHP-2456

Voltage Converter 18-36VDC Input, 56VDC @ 4.46A 250W Regulated output. 

The TP-VRHP-2456-250 is a high power 250W voltage converter/regulator which accepts an input of plus or minus 18VDC to 36VDC and provides a regulated output of 56VDC @ 4.46A 250W. These units are perfect for providing 56VDC voltage from 24VDC battery banks. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C.

DATA SHEET

24VDC to 56VDC 250W DCDC Voltage Converter

TP-VRHP-2456-250

Voltage Converter 18-36VDC Input, 56VDC @ 4.46A 250W Regulated output. 

The TP-VRHP-2456-250 is a high power 250W voltage converter/regulator which accepts an input of plus or minus 18VDC to 36VDC and provides a regulated output of 56VDC @ 4.46A 250W. These units are perfect for providing 56VDC voltage from 24VDC battery banks. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C.

DATA SHEET

24VDCin, 48V Passive PoE Inserter

TP-DCDC-2448-HP

+/- 18-36VDC IN, 56VDC OUT 30W High Power DC to DC Converter/PoE inserter. 10/100Mb.

Features

- Input Voltage +/- 18-36VDC; Output 56VDC Passive PoE

- Integrated 10/100Mb PoE Inserter

- High Power 30W

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation 60°C

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-2448-HP DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a +/-24V battery system. 

DATA SHEET

24VDCin, 56V Gigabit Passive PoE Inserter

TP-DCDC-2448G-HP

Gigabit +/- 18-36VDC IN, 56VDC OUT 50W High Power DC to DC Converter/PoE inserter.

Features

- Input Voltage +/- 18-36VDC; Output 56VDC Passive PoE

- Integrated Gigabit PoE Inserter

- Short Circuit, Over Current and Over Voltage Protection

- High Temperature Operation 60°C

- Removable Wire Terminal Input for up to 12AWG wires

The TP-DCDC-2448G-HP DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 56VDC Power Over Ethernet voltage from a +/-24V battery system.

They have an integrated Gigabit Passive PoE injector to apply the regulated 56VDC to the CAT5 Ethernet cable. The input voltage must be between 18VDC and 36VDC.

DATA SHEET