24 Port Cat6 UTP Patch Panel 1U

48 Port Cat6 UTP Patch Panel, 2U

6U Rack Cabinet, Tempered glazed front door, fan installed on top cover

AF-MPX4

airFiber NxN 4x4 MIMO Backhaul Technology

Combine multiple airFiber X radios on a single dish antenna for superior noise immunity performance, redundancy, and multi-Gigabit Point-to-Point (PtP) throughput.

DATA SHEET

AF-MPX8

airFiber Multiplexer 8x8

Combine multiple airFiber X radios on a single dish antenna for superior noise immunity performance, redundancy, and multi-Gigabit Point-to-Point (PtP) throughput.

DATA SHEET

TP-DCDC-2USB-24

USB Powered 24V Passive PoE inserter. 24VDC 12W Passive PoE Output with 2 USB power inputs. 10/100Mb.

Features

-Remotely Power 24VDC Passive PoE Equipment thruCAT5 Cable from USB power.

-A Must for Every Wireless Tech Tool Kit!

-Up to 12W Passive 24VDC PoE Output

-Short Circuit, Over Current and Over VoltageProtection

-10/100Mb Compatible

The TP-DCDC-2USB-24 Passive Power Over Ethernet Power Source offered by Tycon Power Systems is a unique 24VDC Passive POE injector powered by two USB ports. They work by supplying power to the remote device on the 4 unused Ethernet pins 4,5(+) and 7,8(-). The Ethernet spec supports distances up to 100m (328 feet).

INS-8023AF-O

Instant 802.3af Adapters

Instant 802.3af Converters transform passive PoE devices into 802.3af-compliant products.

DATA SHEET

Media Converter, 1 Fiber Port, 1 UTP Port 1G. SFP Port External Power Supply 220V AC

It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial quad-core CPU, fast response, is currently one of the fastest fiber splicing machine in the market; with 5-inch 800X480 high-resolution screen, the operation is simple and intuitively; and up to 300 times focus magnifications, making it is very easy to observe the fiber with naked eyes. 6 seconds speed core alignment splicing, 15 seconds heating, the working efficiency increased by 50% compared to ordinary splicing machines.

Complete with workers stool and full required tool kit for work, the splicer is suitable for use with SM, MM, bare fiber, pigtail, rubber-insulated and multi-fiber cable.

Data Sheet

PAK-620

Precision Alignment Kit for PowerBeam 620 devices.

The Precision Alignment Kit enables extremely accurate aiming to optimize airFiber® and airMAX® Point-to-Point (PtP) links.

RBFTC11

Fiber to Copper converter, Outdoor case, 12-57V PoE with 802.3af/at support

The FTC is a simple Fiber to Copper converter. Unlike many other media converters available on market, it has outdoor waterproof case with lock screw, it\'s mounting bracket can be attached and locked with a screw from inside the case. Unit has 12-57V PoE with 802.3af/at support (with unshielded cross cable). Comes with PoE injector and power supply. Works only with Gigabit SFP connections.

DATA SHEET

S+2332LC10D

Pair of SFP+ (10Gbit) modules, 10km, for single optical cable

Bidirectional SFP+ 10G module kit. Kit contains two SFP+ modules that can be used as pair to achieve operating data rate up to 10Gbps for distances up to 10km on single optical cable.

DATA SHEET

S+31DLC10D

SFP+ (10Gbit) module, Long range 10km, Single Mode

S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections 

Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

DATA SHEET

S+85DLC03D

SFP+ (10Gbit), 300m, Multi Mode

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections 

Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

DATA SHEET

S-3553LC2

Two SFP (1.25G) module kit, 20Km, single mode

S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transceiver with an LC connector,T1550nm/R1310nm, which works for connections up to 20km and supports DDM. 

Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.

DATA SHEET

S-85DLC05D

SFP (1.25G) module, 550m, Multi Mode

S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM 

Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.

DATA SHEET

The TwistPort™ Adaptor V2 for Rocket 5AC-PTP and PTMP makes the Rocket™ compatible with all TwistPort™ Antennas. TwistPort™ Adaptors are equipped with our original quick locking waveguide port. Connecting and disconnecting the Rocket™ 5AC-PTP or PTMP into the TwistPort™ Adaptor V2 is very simple and requires no tools.

DATA SHEET

TC-CON

TOUGH Cable Connectors x 100

Specifically designed for use with TOUGHCable, the TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage, while allowing rapid field deployment without soldering.

DATA SHEET

The TwistPort™ Adaptor V2 for Rocket 5AC-PTP and PTMP makes the Rocket™ compatible with all TwistPort™ Antennas. TwistPort™ Adaptors are equipped with our original quick locking waveguide port. Connecting and disconnecting the Rocket™ 5AC-PTP or PTMP into the TwistPort™ Adaptor V2 is very simple and requires no tools.

DATA SHEET

U-Installer

Ubiquiti Installer

The U-Installer is a useful tool to make airMAX CPE installation easier. It provides Wi-Fi connectivity and 24V PoE power to a CPE, so you can use the intuitive UNMS Mobile app on a smartphone or tablet for alignment and configuration.

DATA SHEET

UF-GP-B+

The UFiber OLT’s GPON SFP ports are designed for use with the UF-GP-B+ SFP module. The UF-OLT includes one UF-GP-B+ module; these additional modules can be purchased in packs of 20. The cost shown is per module.

DATA SHEET

UF-GP-C+

The UFiber OLT’s GPON SFP ports are designed for use with the UF-GP-C+ SFP module. These additional modules can be purchased in packs of 20. The cost shown is per module.

DATA SHEET

UDC-1

UniFi Direct Attach Copper Cable, 10 Gbps, 1 meter

The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.