List of products by D-Line

D-Line provide high quality trunking that is quick and easy to fit and you can paint it to match your walls. 

16 x 8mm Micro Trunking

To hide speaker cable, bell wires, telephone and alarm cable, Micro trunking offers a discreet solution.

Available in a choice of colours and with a range of Smooth-Fit accessories, the 16 x 8mm dimensions give options in the tightest of spaces and can often fit around door frames.

Dimension: 16mm (W) x 8mm (H)      Available in 2 and 3 Metre lengths

  • Micro profile, only 16x8mm (WxH)
  • Patented hinge & click-lock lid
  • Paintable
  • Smooth-fit accessories available for perfect finish
  • ‘Easy to install, looks great!’
  • Self-adhesive
  • Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

20 x 10mm Micro+ Trunking

D-Line 20 x 10mm Micro+ cable trunking gives a neat solution for single cables, while offering additional internal capacity that can be useful around corners.

Dimensions 20mm (W) x 10mm (H)       Available in 2 and 3 Metre lengths

Complementary Clip-Over bends and tees are incredibly easy to install. Ideal for flexible cables (up to 8mm outer diameter), also fibre-optic, satellite/aerial and broadband cable installations.

  • Discreet and stylish appearance; only 20 x10mm (WxH)
  • Patented hinge & click-lock lid
  • Paintable
  • Clip-over accessories available for perfect finish
  • ‘Easy to install, looks great!’
  • Self-adhesive
  • Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

22 x 22mm Trunking

¼-round 22 x 22mm profile covers expansion gaps between floors and skirting, while providing an easy-to-use cable duct around floor perimeters. The 22 x 22mm (W x H) dimensions scale well to blend with popular skirting boards, while providing capacity for cable bending radii around corners.

Traditional floor trim is usually nailed, and requires perfect measuring of lengths before corners can be mitre-cut at 45º angles

  • Easy to install, looks great!
  • Self-adhesive, simply peel & stick to skirting
  • Clip-Over or Smooth-Fit corners eliminate the need to mitre-cut
  • A smart alternative to traditional floor trims
  • Shock-absorbing hinge effect
  • Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

30 x 30mm Trunking

¼-round 30 x 30mm Trunking is popular for right-angle intersections, and offers additional capacity. This profile is available with Smooth-Fit accessories.

This quadrant trunking can be an ideal solution for cornice drops, around benches and can eliminate need for skirting boards in smaller rooms.

The tensioned hinge can act as a shock absorber, useful when installed as a floor trim!

Dimensions: 30mm (W) x 30mm (H)   Available in 2 and 3 Metre lengths

  • Unique stylish ‘D-Line’ appearance
  • Saves channelling walls
  • Self-adhesive
  • Smooth-fit accessories available for perfect finish
  • Shock-absorbing hinge effect
  • Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

40 x 20mm Mini+ Trunking

Line 40 x 20mm Mini+ cable trunking profile provides capacity ideal for 2x 4mm T&E cables for example.

As applicable to all D-Line lengths, the hinged lid will never detach so future maintenance concerns are minimised.

Available with smooth-fit accessories

Dimensions : 40mm (W) x 20mm (H)      Available in 2 and 3 Metre lengths

  • Unique stylish ‘D-Line’ appearance
  • Patented hinge & click-lock lid
  • Paintable
  • Smooth-fit accessories available for perfect finish
  • ‘Easy to install, looks great!’
  • Self-adhesive
  • Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

50 x 25mm Maxi Trunking

D-Line 50 x 25mm Maxi is a versatile trunking, providing capacity for several cables.

A wide range of Clip-Over and Smooth-Fit accessories are available.

The size, capacity and range of colours makes this profile a market-leading solution that is ideal for many AV, electrical and datacoms projects.

Dimensions: 50mm (W) x 25mm (H)      Available in 2 and 3 Metre lengths

  • Unique stylish ‘D-Line’ appearance
  • Saves channelling walls
  • Self-adhesive
  • Clip-Over & Smooth-Fit accessories for perfect finish
  • A smart alternative to traditional offers
  • No sharp edges, gentle on impact
  • Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

60 x 30mm Maxi+ Trunking

D-Line 60 x 30mm Maxi+ provides a useful option when extra capacity is required for multiple cables.

60 x 30 mm profiles are popular for containing HDMI and aerial cables dropping from wall mounted TV’s… scaling very well for example with 50” + width screens.

Available with Smooth-Fit accessories that offer secure fitment, as the male shoulder tabs are secured under the fastened lid.

Dimensions:   60mm (W) x 30mm (H)    Available in 2 and 3 Metre lengths

  • Unique stylish ‘D-Line’ appearance
  • Patented hinge & click-lock lid
  • Paintable
  • Smooth-fit accessories available for perfect finish
  • ‘Easy to install, looks great!’
  • Self-adhesive
  • Fully safety tested and certified to BS EN 50085-1:2005

DATA SHEET

CC-1 Light Duty Trunking

Light Duty Floor Cable Protectors are popular as a temporary solution to cover cables across open areas with light foot traffic.

The 17 x 9mm cavity can accommodate 2x 8mm outer diameter flex cables.

  • Ideal for areas with light foot traffic
  • Address a common cause of trips, tugs and falls
  • Can protect up to 2x 8mm diameter cables
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Supplied coiled in box; simply uncoil to lay flat
  • Fully safety tested and certified to BS EN 60670-1:2005

DATA SHEET

CGS3B Cable Grip Strip Trunking

Cable Grip Strip is a neat and easy way to keep cables in place, and to eliminate risk of cables becoming a hazard.

Installers simply attach the Cable Grip Strip over cables. The 75mm wide x 3m long strip has hooks on rear which grip to closed-loop commercial carpet designs.

  • For under desks, and perimeter of carpeted office floors
  • Hook design on rear grips to commercial office carpets/carpet tiles
  • Easy to remove, reusable, no adhesive residue
  • Flat design, supplied coiled
  • Simply scissor cut to size then pinch cables and lay over cable length(s)
  • Not designed to protect cables from pedestrian traffic, but ideal to keep cables in position

DATA SHEET

FC68B Linkable Trunking

The heavier gauge design of Medium Duty Floor Cable Protectors addresses cable trip hazards… while providing effective protection for cables. 

By minimising the risk of split insulation and damaged conductor strands, the danger of electrocution and hot spots (that create fire risks) is minimised also. 

Lengths are available as 1.8m or 9m options, and supplied with friction-fit connector pins so that they can be joined to make continuous runs when necessary.

  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • 14mm x 9mm cavity
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat
  • Fully safety tested and certified to BS EN 60670-1:2005

DATA SHEET

FC83B Linkable Trunking

Medium Duty profiles uncoil to effectively lay flat across surfaces, while the tapered sloping sides are pedestrian-friendly. The pre-split back enables users to simply retro-fit the profile over the cables. Features combine so that cables can be contained within the cavity, with minimal risk of movement.

The unique connector pins provide an effective friction-fit connection that can be pushed-in, then later pulled apart, in adjoining lengths – to cover whatever length of cable is required. 

  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • 30mm x 10mm cavity
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat

DATA SHEET

FC83B/2C/9M Linkable Trunking

Medium Duty 2-compartment Floor Cable Protectors are ideal if segregation is required between cable types; for example to separate mains voltage and low-voltage cables.

Same as all D-Line Medium Duty Cable Protectors, the rear is ribbed to minimise movement on smooth surfaces. 

Both cavities offer 12 x 13mm inner capacity.

  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • Prevent cable insulation damage/electrocution and risk of broken conductor strands­­
  • 2 x 13mm x 12mm cavity
  • Ribbed non-slip base
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat
  • No sharp kerb-effect, pedestrian friendly
  • Fully safety tested and certified to BS EN 60670-1:2005

DATA SHEET

FC83H Linkable Trunking

Ideal for up to 3x 8mm diameter cables, this versatile Cable Protector is supplied with connector pins so it can be cut to shorten, then reconnected or combined with other lengths to make longer runs.

The hazard stripe gives greater visibility to pedestrians.

Available in 1.8m lengths, or 9m length options.

Supplied with connector pins, so lengths can be joined to make longer runs.

  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • Prevent cable insulation damage/electrocution and risk of broken conductor strands­­
  • 30mm x 10mm cavity
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat
  • No sharp kerb-effect, pedestrian friendly

DATA SHEET